{"title":"Accessories \u0026 Supplies","description":"\u003cp\u003e3d printing accessories and supplies for everyday 3d printing use in any workshop or space. No matter if you have a Creality, Bambu Lab, Anycubic, Elegoo, or whatever. All of those printers need accessories! Which is why we are building a space all makers can come in order to buy 3d printing parts and accessories in one place. \u003c\/p\u003e","products":[{"product_id":"cob-led-strip-lights-daylight-white-6000k-16-4ft-24v-high-cri-95ra-super-bright-flexible-tape-lights-for-bedroom-mirror-kitchen-cabinet-living-roompower-supply-not-included","title":"COB LED Strip Lights Daylight White 6000K,16.4Ft 24V High CRI 95Ra+ Super Bright,Flexible Tape Lights for Bedroom,Mirror,Kitchen Cabinet, Living Room(Power Supply Not Included)","description":"\u003cul\u003e\n\t\u003cli\u003eLed lights used in the kits sold and manufatured by \u003cstrong\u003eStay Ready To 3D Print\u003c\/strong\u003e. Buy these LED's and make your own kit for your machines. You will need the mini jst connectors in our store as well, along with dual coated lead wire and heat shrink 1\/4\"\u003c\/li\u003e\n\t\u003cli\u003eUltra Bright:COB LED Strip Lights has 320 lamp beads per meter. Compared with the traditional SMD Strip Lights, the lamp beads are denser and the light is brighter and softer. It is the first choice for modern decorative lighting. Please note: power supply is not included.\u003c\/li\u003e\n\t\u003cli\u003eHigh Light Efficiency and CRI:95+ High Color Rendering Index, which can perfectly restore the color of the object itself, with no black spots and no flash.\u003c\/li\u003e\n\t\u003cli\u003eCuttable \u0026amp; Flexible：Strip Lights can be cut every 1.5inches along the cutting mark. The remaining parts can be used normally. Can be used to make various DIYs. The light strip is extremely flexible and will not damage the lamp beads even in complex bends.\u003c\/li\u003e\n\t\u003cli\u003eEasy to Install and Use：You only need to peel off the double-sided tape on the back to install it. The double-sided tape is strong and will not fall off easily. You need to connect a transformer or power supply with corresponding voltage before you can use this light strip（Transformer search code available for purchase：B0DZP3RC6\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003eSpecifications :\u003c\/h4\u003e\n\n\u003cdiv\u003e\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eWorking Voltage : 12V\/24V \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eLED Quantity :384 leds \/M \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCRI:95+ \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003ewidth：0.3inch \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eUsage : Indoor \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eWorking Power :12W\/M \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eNote:\u003c\/p\u003e\n\n\u003cp\u003epower supply is not included.You need to connect a transformer or power supply with corresponding voltage before you can use this light strip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003eWhy buy this Strip Lights?\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eUltra Brigh：\u003c\/span\u003eLED Strip Lights has 120 lamp beads per meter.Compared with similar light strips,the lamp beads are denser and the light is brighter.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eCuttable：\u003c\/span\u003eStrip Lights can be cut along the cut marks.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eHigh Light Efficiency and CRI\u003c\/span\u003e：90+ High Color Rendering Index.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFlexible:\u003c\/span\u003eThe light strip is extremely flexible and will not damage the lamp beads even in complex bends.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e16.4ft Required transformer wattage:100W\u003c\/p\u003e\n\n\u003cp\u003e32.8ft Required transformer wattage:150W\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUltra Bright\u003c\/h3\u003e\n\n\u003cp\u003eCOB LED Strip Lights has 320 lamp beads per meter. Compared with the traditional SMD Strip Lights, the lamp beads are denser and the light is brighter and softer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHigh Light Efficiency and CRI\u003c\/h3\u003e\n\n\u003cp\u003e95+ High Color Rendering Index, which can perfectly restore the color of the object itself, with no black spots and no flash.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003eDouble-sided tape\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003eCuttable\u003c\/h4\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003eFlexible\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Daylight White \/ 16.4Ft 24V","offer_id":42411080417389,"sku":"B0DHV8ZF4R","price":14.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/610qmG-ybiL._AC_SL1500.jpg?v=1747784251"},{"product_id":"30-pairs-jst-1-25-mm-2-pin-micro-male-female-connector-plugs-with-red-black-wire-80-mm","title":"30 Pairs JST 1.25 mm 2 Pin Micro Male\/Female Connector Plugs with Red Black Wire 80 mm","description":"\u003cul\u003e\n\t\u003cli\u003e【Wire specification】: 1571#28\u003c\/li\u003e\n\t\u003cli\u003e【Micro connector dimension】: micro jst 1.25mm each cable wire length is approx. 8 cm\/ 3.15 inches（Male Length+ Female Length: 170MM）, the cable wire diameter is 1.25 mm, \u003cstrong\u003emicro size fits Creality led connection\u003c\/strong\u003e\n\u003c\/li\u003e\n\t\u003cli\u003e【Wire core】: 7 section 0.11 mm zinc copper, external diameter is 0.9 mm, tail zinc size is 2 mm, standard size, suitable for common uses\u003c\/li\u003e\n\t\u003cli\u003e【Match well with】: 26 AWG jst 1.25mm 2 pin micro male connector match well with female connector, easy to install and use\u003c\/li\u003e\n\t\u003cli\u003e【Common usage】: Creality LED light mods, mini RC helicopter，LED strips，electrical appliances, automobiles, robots, lighting, toys,batteries etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eFeatures:\u003cbr\u003e\n100% brand new and high quality\u003cbr\u003e\nMicro jst 1.25mm 2-Pin Male and Female Connector plug with Wires Cables\u003cbr\u003e\nMicro connector Light weight, small resistance, the use of green tin solder\u003cbr\u003e\nSpecifications:\u003cbr\u003e\n1.Cable type: 2pin.\u003cbr\u003e\n2.Length of wire: 8.5cm\/3.3in\u003cbr\u003e\n3.Rated temperature:80℃\u003cbr\u003e\n4.Rated Voltage: 30V\u003cbr\u003e\n5.Material: Tinned copper wire, plastic head at each end.\u003cbr\u003e\n6.Reference standard: UL758, UL1581\u003cbr\u003e\n7.Pitch size: 2.54mm.\u003cbr\u003e\n8.PVC SR-PVC iNSulation, comply with ROHS environmental standard\u003cbr\u003e\nPVC jacket, pased ROHS environmental standard (optional)\u003cbr\u003e\nTinned or bare copper wire spiral shield (optional)\u003cbr\u003e\nPasses UL VW-1 and JQA J-Mark flame test\u003cbr\u003e\nUniform insulation thickness to ensure easy stripping and cutting\u003cbr\u003e\nAPPLICATION: For general purpose internal wiring of appliance,uniform insulation thickness, reliable safety, no looseness, light and beautiful\u003cbr\u003e\nwidely used in mini RC helicopter，LED strips，electrical appliances, automobiles, robots, lighting, toys,batteries etc.\u003cbr\u003e\nPackage includes:\u003cbr\u003e\n30 x Female jst 1.25 mm 2 pin connector with cable wire\u003cbr\u003e\n30 x Male jst 1.25 mm 2 pin connector with cable wire\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Default Title","offer_id":42411172986989,"sku":"B013JRWCBU","price":9.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/71e4AXvd_FL._AC_SL1500.jpg?v=1747784531"},{"product_id":"m3-flat-head-machine-screws-and-hex-nuts-kit-380-pcs-black-countersunk-head-phillips-screws-bolts-nuts-assortment-kit-m3-x-4mm-6mm-8mm-10mm-12mm-16mm-20mm","title":"M3 Flat Head Machine Screws and Hex Nuts Kit Variety Lengths K2 PLUS Thumbscrew, 380 Pcs Black M3 X 4Mm\/ 6Mm\/ 8Mm\/ 10Mm\/ 12Mm\/ 16Mm\/ 20Mm","description":"\u003cul\u003e\n\t\u003cli\u003eFor Use With The SRT3DP TPU Mod on YouTube. These Will Work For Your Thumscrew ( May Need Washer Depending on Spring Used )\u003c\/li\u003e\n\t\u003cli\u003eExquisite Material: These machine screws bolt and nuts are made of high-quality carbon steel with high strength and hardness, corrosion and rust resistance, smooth surface without burrs, not easy to break or deform, durable for use.\u003c\/li\u003e\n\t\u003cli\u003eCountersunk Head Phillipe Design: The thread of black metric phillipe flat head screws bolts is clear and accurate, not easy to deform and shift during use, and not easy to loosen. Hex nuts provide a more precise fit, reduce stress and protect parts and screws.\u003c\/li\u003e\n\t\u003cli\u003eEasy to Store: All countersunk flat head machine screws are stored in a transparent and sturdy storage box with compartments. Screw and nut set is stored separately, well organized, easy to carry and find. There is no confusion during transportation and it is convenient to use.\u003c\/li\u003e\n\t\u003cli\u003eMulti-scenario Application: Suitable for home, office equipment industry, electronics industry, communication industry, machinery, maintenance, aircraft, ships, bicycles, motorcycles, automobiles, chemicals, and other fields.\u003c\/li\u003e\n\t\u003cli\u003ePackage Includes: 380pcs in total, size includes: 40 pcs m3*4mm, 40 pcs m3*6mm, 30 pcs m3*8mm, 30 pcs m3*10mm, 30 pcs m3*12mm, 30 pcs m3*16mm, 30 pcs m3* 20mm, 150 pcs nuts, the quantity is sufficient and the size is rich to meet the needs of daily use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eWhat are the advantages of our countersunk head machine screw kit?\u003cbr\u003e\n🔩 The flat head machine screws bolts are made of high-quality carbon steel, which has strong corrosion resistance, high hardness and durability.\u003cbr\u003e\n🔩 The countersink screws bolts are designed with a flat cross head, the threads are clear and clean, and will not slip during use.\u003cbr\u003e\n🔩 All m3 countersunk head screws and nuts are placed in a storage box to keep everything organized and easy to store and carry.\u003cbr\u003e\n🔩 Suitable for home, office equipment industry, electronics industry, communication industry, machinery, maintenance and other fields.\u003cbr\u003e\nFeaturese:\u003cbr\u003e\nMaterial: Carbon steel\u003cbr\u003e\nColor: Black\u003cbr\u003e\nquantity: 380 pcs\u003cbr\u003e\nPackage Includes:\u003cbr\u003e\n40 Pcs - M3*4mm\u003cbr\u003e\n40 Pcs - M3*6mm\u003cbr\u003e\n30 Pcs - M3*8mm\u003cbr\u003e\n30 Pcs - M3*10mm\u003cbr\u003e\n30 Pcs - M3*12mm\u003cbr\u003e\n30 Pcs - M3*16mm\u003cbr\u003e\n30 Pcs - M3*20mm\u003cbr\u003e\n150 Pcs - Nuts\u003cbr\u003e\nWarranty after sale:\u003cbr\u003e\nIf you have any questions about the flat head machine screw set, please contact us in time, we will solve your questions ASAP.\u003cbr\u003e\nWarm Tips:\u003cbr\u003e\nColor may vary slightly from the online image due to your monitor colour settings, please refer to the actual product, thank you for your understanding.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"380 \/ One Size","offer_id":42454899621997,"sku":"B0CCPH974T","price":11.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/71ZAXkXPYFL._SL1500.jpg?v=1748099458"},{"product_id":"10-pcs-premium-pc4-m10-bowden-tube-coupler-male-compatible-with-3d-printers-splitters","title":"10 PCS Premium PC4-M10 Bowden Tube Coupler Male Compatible with  3D Printers \u0026 Splitters","description":"\u003cul\u003e\n\t\u003cli\u003eCOMPATIBILITY: These PC4-M10 pneumatic male straight quick connectors are suitable for \\ Bowden extruders and compatible with Ender-3, Ender-3 V2, CR10 and other 3D printers as well with some of the splitters you print from sites such as Makerworld, Thingiverse, or Printables.\u003c\/li\u003e\n\t\u003cli\u003eDIMENSION: Thread 10mm, core diameter 4mm, seamlessly compatible with 4mm outer diameter Bowden tubing, ensuring a secure and leak-proof connection between your Bowden tube and your 3D printer. They are Ideal for smooth and reliable material feeding in 3D printing applications.\u003c\/li\u003e\n\t\u003cli\u003eAPPLICATION: PC4-M10 pneumatic connectors fit in 3D printer 1.75mm filament and other, compatible with 3D printer 1.75mm filament and other devices.\u003c\/li\u003e\n\t\u003cli\u003ePREMIUM MATERIAL: The couplers are made of premium stainless steel and plastic, high hardness, anti-oxidation and anti-corrosion, increasing the life.\u003c\/li\u003e\n\t\u003cli\u003eEASY TO INSTALL: These connectors feature a push-to-connect design for quick and easy installation without any tools. Simply push to connect and lock, to disconnect, just press the release cap and pull out the tube. Setup is quick and hassle-free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003eLeak-Proof \u0026amp; Secure\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eThe PC4-M10 pneumatic coupler features an advanced sealing design that prevents air leakage and ensures consistant and steady airflow and pressure in the system. Once installed, your tubings can rotate 360°, providing enhanced flexibility and ease of use.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eMulti-functional and Multi-purpose\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eThe PC4-M10 pneumatic connectors are compatible with PTFE, PU and Nylon tubing. They are well suited for a variety of applications, in addition to 3D printing, in pneumatic systems, air compressors, automation equipment and machinery requiring precise airflow or air pressure control.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eInstall: connecting by the outer thread of the quick fitting.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003eRemove: press and hold the black end of the quick fitting and pull out the tube.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003ePackage Included\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan\u003e10PCS PC4-M10 pneumatic male straight connectors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Default Title","offer_id":43291275886701,"sku":"B0F62FZK4R","price":6.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/71UsZbAhdLL._AC_SL1500_edb4a00f-5252-41c2-9375-47b18cc78252.jpg?v=1757635102"},{"product_id":"rfid-tags-for-creality-3d-printers-cfs","title":"RFID Tags For Creality 3D Printers\/CFS","description":"\u003cp\u003eRFID Tags work on a frequency that allow them to recieve and send data to be stored. Our tags have been proven to work with the Creality printers and CFS. We recommend you add one tag to each side of your roll for use in the CFS for a reliable reading success rate. Another way to use our tags is to just create a tag for your common filaments, print tag plates like a dog tag size and place these tags on a keyring. Then, simply hold the tag next to the printers RFID reader when you load that filament so it auto enters the info for you on machines such as the Creality HI or K2 Plus when using the side spool holder. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoding your tags:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e There are a few ways to do this, but the easiset way is to use an android device and download the app called \"RFID FOR CFS\". Theres a how to video on Youtube at the Stay Ready To 3D Print Channel Page.\u003c\/p\u003e","brand":"Stay Ready To 3D Print","offers":[{"title":"10","offer_id":43291307638893,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true},{"title":"20","offer_id":43291307671661,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true},{"title":"30","offer_id":43291307704429,"sku":null,"price":19.99,"currency_code":"USD","in_stock":true},{"title":"40","offer_id":43291307737197,"sku":null,"price":25.99,"currency_code":"USD","in_stock":true},{"title":"50","offer_id":43291307769965,"sku":null,"price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/Screenshot2025-09-11181418.png?v=1757636509"},{"product_id":"72-colors-acrylic-paint-markers-set-with-canvas-bag-dual-tips-with-brush-tip-fine-tip-no-bleed-waterproof-non-toxic-odorless-paint-pens-for-rock-egg-wood-fabric-glass-ceramic-diy","title":"72 Colors Acrylic Paint Markers Set with Canvas Bag, Dual Tips with Brush Tip \u0026 Fine Tip, No-Bleed, Waterproof, Non-Toxic \u0026 Odorless Paint Pens for Rock, Egg, Wood, Fabric, Glass, Ceramic, DIY","description":"\u003cul\u003e\n\t\u003cli\u003eIntroducing the Acrylic Paint Markers Set, an essential tool for artists and crafters alike. This comprehensive set includes a variety of vibrant colors, featuring both standard shades and metallic hues, allowing for endless creativity. The dual-tip design caters to various artistic needs, with a 1-5mm round brush tip perfect for filling in larger areas and a 1mm fine tip ideal for intricate detailing and outlining. Whether you are embellishing rocks, creating unique designs on fabric, or adding a personal touch to glassware, these markers provide the versatility to bring your artistic vision to life.\u003c\/li\u003e\n\t\u003cli\u003eDesigned with user convenience in mind, the upgraded cotton nibs ensure quick drying and smooth application on a wide range of surfaces, including paper, wood, ceramics, and more. The water-based, non-toxic, and odorless ink guarantees a safe and enjoyable experience for artists of all ages. This set not only makes for a fantastic gift for any occasion but also serves as a perfect addition to your own art supplies, inspiring creativity and artistic expression. Elevate your DIY projects and craft creations with the brilliance of these acrylic paint markers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDual Tip Design: Each marker features a versatile 1-5mm round brush tip for broad strokes and a precise 1mm fine tip for detailed work.\u003c\/li\u003e\n\t\u003cli\u003eQuick Drying: Upgraded cotton nibs allow for faster drying times, ensuring artwork is smudge-free and vibrant.\u003c\/li\u003e\n\t\u003cli\u003eVibrant Color Selection: bright colors, including, standard shades and metallics, provide endless creative possibilities.\u003c\/li\u003e\n\t\u003cli\u003eMulti-Surface Compatibility: Suitable for use on paper, wood, glass, fabric, and more, making them perfect for a variety of projects.\u003c\/li\u003e\n\t\u003cli\u003eSafe and Non-Toxic: The water-based ink is non-toxic, odorless, and acid-free, ensuring safe use for artists of all ages.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Just Art","offers":[{"title":"Canvas Bag \/ 72","offer_id":43841738113133,"sku":"B0FQHBY5VK","price":37.05,"currency_code":"USD","in_stock":true},{"title":"Canvas Bag \/ 48","offer_id":43841738145901,"sku":"B0DHZGK3NW","price":20.05,"currency_code":"USD","in_stock":true},{"title":"Plastic Case \/ 60","offer_id":43841738178669,"sku":"B0DNQR8XD2","price":23.06,"currency_code":"USD","in_stock":true},{"title":"Plastic Case \/ 48","offer_id":43841738211437,"sku":"B0DNQRKGH5","price":26.38,"currency_code":"USD","in_stock":true},{"title":"Canvas Bag \/ 36","offer_id":43841738244205,"sku":"B0DHZK464M","price":14.52,"currency_code":"USD","in_stock":true},{"title":"Plastic Case \/ 24","offer_id":43841738276973,"sku":"B0DL38V4BW","price":11.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/81V--IwaI8L._AC_SL1500.jpg?v=1767133352"},{"product_id":"9-tier-3d-printer-filament-spool-storage-rack-with-anti-tip-kit-stand-organizer-can-store-up-to-54-rolls-for-3d-printer-lovers","title":"9-Tier 3D Printer Filament Spool Storage Rack with Anti-Tip Kit, Stand Organizer Can Store up to 54 Rolls for 3D Printer Lovers","description":"\u003cp\u003e\u003cspan style=\"font-size:20px;\"\u003e\u003cu\u003e\u003cstrong\u003e​​​​​​​Product description\u003c\/strong\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e[𝗛𝗶𝗴𝗵 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 𝗦𝘁𝗼𝗿𝗮𝗴𝗲] 9-tier design holds 45-54 3D filament spools (5\/6 per tier). Perfect for large-scale storage and seamless workflow organization\u003c\/li\u003e\n\t\u003cli\u003e[𝗧𝗵𝗼𝘂𝗴𝗵𝘁𝗳𝘂𝗹 𝗔𝗻𝘁𝗶-𝗧𝗶𝗽 𝗦𝗮𝗳𝗲𝘁𝘆] It can secure the 6.56ft-tall (2m) rack to walls and prevent tipping, ideal for homes with kids\/pets or busy workshops\u003c\/li\u003e\n\t\u003cli\u003e[𝗦𝗽𝗮𝗰𝗲-𝗦𝗮𝘃𝗶𝗻𝗴 𝗩𝗲𝗿𝘁𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻] Compact 16.5”W x 11.8”D footprint stores 54 spools in just 1.35 sq ft (0.126㎡). Perfect for 3D home studios, professional shops, or small businesses\u003c\/li\u003e\n\t\u003cli\u003e[𝗘𝗳𝗳𝗼𝗿𝘁𝗹𝗲𝘀𝘀 𝗔𝘀𝘀𝗲𝗺𝗯𝗹𝘆] Snap-fit main rack assembles tool-free in minutes; anti-tip kit includes screws (tools needed for optional wall mounting). Ready to organize with \"snap, click, store\"!\u003c\/li\u003e\n\t\u003cli\u003e[𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆] 9.37\" tier spacing fits 1kg\/500g\/300g\/200g 3D filament spools. Each tier supports 30 lbs (15kg) and holds mixed sizes without compromise\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"L","offer_id":43841967849581,"sku":"B0F8B5NZHF","price":35.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/314fb1029723e227125e799b67cfaac3.jpg?v=1767136193"},{"product_id":"40khz-handheld-craft-cutting-too-ultrasonic-cutter-with-50-replacement-blades-oled-display-for-plastic-3d-prints-diy-us-plug","title":"40Khz Handheld Craft Cutting Tool Ultrasonic Cutter  with 50 Replacement Blades OLED Display, for Plastic 3D Prints DIY (US Plug)","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePrecise Cutting Tool: The 40KHz ultrasonic cutter delivers accurate cuts for materials like 3D prints, plastic, wood, and resin with its upgraded vibration system, also capable of grinding and polishing tasks, making it ideal for craftsmen and craft enthusiasts.\u003c\/li\u003e\n\t\u003cli\u003eReal Time Operation Monitoring: This ultrasonic cutter features an OLED screen displaying cutting mode and safety lock status, along with built in overheating protection that automatically shuts off the tool when necessary for safe operation.\u003c\/li\u003e\n\t\u003cli\u003eDual Cutting Modes: Switch between button activated safety mode and automatic mode for detailed work or efficient cutting, while the added child lock provides extra security for home workshops using the 40kHz Ultrasonic Cutter.\u003c\/li\u003e\n\t\u003cli\u003eFocused LED Illumination: The handheld ultrasonic cutting Tool includes a focused LED light that illuminates a 5cm diameter area at the cutting point for accurate blade positioning, paired with a 30° incisive blade for clean cuts.\u003c\/li\u003e\n\t\u003cli\u003eKit: The 40kHz ultrasonic cutter comes with 50 replacement blades and a powerful adapter, while its lightweight design and ergonomic grip ensure comfort during detailed projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003e40kHz Handheld Craft Cutting Tool 30W 3 Gears with 50 Replacement Blades OLED Display, for Plastic 3D Prints DIY\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e1. After connecting to the power supply, press the power button to turn on the device. The display will light up. Hold the safety lock switch to activate the ultrasonic vibration, and you can start the cutting operation. To adjust the cutting strength, briefly press the M key to switch between levels.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e2. To change the language setting, press and hold the M key and the power button simultaneously for 5 seconds. The display will automatically switch languages.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e3. After completing the cutting operation, press the power button to turn off the device and cover it with the protective cap. Store the ultrasonic cutter in the tool bag or storage cabinet for safekeeping.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eItem Type: Ultrasonic Cutter\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eMaterial: Aluminum Alloy, Ti Alloy\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eInput Interface: Type C PD, QC\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eOutput Power: 30W maximum\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eGear: Three Gears\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eInput Interface Voltage: 12V\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003ePackage List\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e1 x Ultrasonic Cutter\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e1 x Adapter\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e1 x Type C To Type C Cable\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e50 x Cutting Blade\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e5 x Blade Storage Box\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e2 x Blade Collet\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e2 x Wrench\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e4 x Screw\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e1 x Instruction Manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Us Plug","offer_id":43841968898157,"sku":"B0G3PZJRDM","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/51ltNfv4WbL._AC_SL1500.jpg?v=1767136535"},{"product_id":"nano-polymer-adhesive-50ml-ultimate-3d-printing-bed-build-plate-adhesion-no-mess-non-toxic-works-for-pla-abs-pei-peek-nylon-pc-and-more-easy-application-easy-to-clean","title":"Nano Polymer Adhesive (50Ml) - Ultimate 3D Printing Bed \u0026 Build Plate Adhesion - No Mess, Non-Toxic, Works for PLA, ABS, PEI, PEEK, Nylon, PC and More. Easy Application, Easy to Clean!","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cu\u003e\u003cstrong\u003eNano Polymer Build Plate Adhesive\u003c\/strong\u003e\u003c\/u\u003e\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eReliable adhesion. Zero mess. No more failed prints.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAt \u003cstrong\u003eStay Ready to 3D Print\u003c\/strong\u003e, we test gear the same way you do—hard, hot, and with zero patience for failures. This \u003cstrong\u003eNano Polymer Adhesive\u003c\/strong\u003e is what we use when we need prints to \u003cem\u003estick the first time\u003c\/em\u003e and release clean when they’re done.\u003c\/p\u003e\n\n\u003cp\u003eWhether you’re printing everyday PLA or pushing high-temp engineering filaments, this adhesive delivers \u003cstrong\u003econsistent first layers with no warping, lifting, or delamination\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWorks With Virtually Every Filament\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eFrom beginner materials to advanced polymers, this adhesive handles it all:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\u003cstrong\u003eHigh-Performance Materials:\u003c\/strong\u003e PEEK, CF-PEEK, ULTEM \/ PEI, PPSU, PSU, PPS\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\u003cstrong\u003eEveryday Filaments:\u003c\/strong\u003e PLA, PETG, ABS, ASA, Nylon (PA6, PA12, CF Nylon)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eJust tell me the next move.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eSimple, Clean, and Cost-Effective\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eNo mess. No buildup. No scraping nightmares.\u003c\/p\u003e\n\n\u003cp\u003eApply a thin layer, start printing, and let the adhesive do the work. When the print finishes and cools, parts release cleanly without damaging your surface or your print.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003eWhy We Use It (and Why You’ll Love It)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eEliminates warping and edge lift—even on large prints\u003c\/p\u003e\n\n\u003cp\u003eDries clear with \u003cstrong\u003ezero residue\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eStrong hold during printing, \u003cstrong\u003eeasy release after cooldown\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCleaner and more effective than glue sticks or hairspray\u003c\/p\u003e\n\n\u003cp\u003eOne application lasts multiple prints\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNon-toxic, organic formula\u003c\/strong\u003e—better for you and your workspace\u003c\/p\u003e\n\n\u003cp\u003eIf your printer runs under or over \u003cstrong\u003e300°C\u003c\/strong\u003e, you’re covered.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eCompatible With Almost Any Build Surface\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eNo need to change your setup. This adhesive works flawlessly on:\u003c\/p\u003e\n\n\u003cp\u003eBorosilicate \u0026amp; ceramic glass\u003c\/p\u003e\n\n\u003cp\u003eCreality glass (non-coated)\u003c\/p\u003e\n\n\u003cp\u003ePEI sheets (smooth \u0026amp; powder-coated)\u003c\/p\u003e\n\n\u003cp\u003eGarolite \/ FR4\u003c\/p\u003e\n\n\u003cp\u003eBuildTak\u003c\/p\u003e\n\n\u003cp\u003eWham Bam \u0026amp; flex plates\u003c\/p\u003e\n\n\u003cp\u003eCarbon fiber \u0026amp; PCB surfaces\u003c\/p\u003e\n\n\u003cp\u003eKapton tape and more\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003e\u003cem\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\n\u003cp\u003eFormulated and manufactured in \u003cstrong\u003eCosta Mesa, California\u003c\/strong\u003e, using high-quality organic compounds for reliable, repeatable performance.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIf you’re serious about print quality, this is one of those upgrades you’ll never go back from.\u003c\/strong\u003e\u003cbr\u003e\nStay Ready. Print smarter. Finish stronger.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Default Title","offer_id":43841976041581,"sku":"B09JQWFVY3","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/71nxIXajcAL._SL1500.jpg?v=1767137313"},{"product_id":"2-lbs-orange-reusable-indicating-silica-gel-desiccant-beads-standard-3-5-mm-size","title":"2 LBS Orange Reusable Indicating Silica Gel Desiccant Beads Standard 3-5 Mm size","description":"\u003cul\u003e\n\u003cli\u003eDesiccant Deads Size: VOISEN silica beads are 3-5mm in size and have a bright orange color. Desiccant beads have a strong hygroscopic property and can effectively absorb moisture in the air, keeping items dry and preventing moisture damage to the items, thus protecting the quality of the items.\u003c\/li\u003e\n\u003cli\u003eColor Indication: Orange silica gel will change to Dark Green when 50-60% absorbed with moisture; Still almost half more capacity is left to absorb moisture even after color change. Recommended to check the color of silica gel beads regularly to ensure their effectiveness\u003c\/li\u003e\n\u003cli\u003eReusable：Once desiccant beads turn dark green, can be reactivated by placing in the oven for 0.5 to 2 hours at 200 to 250F Or Microwave for 10 Minutes at defrost mode; They may take shorter than the recommended time, please check the color of the silica beads periodically\u003c\/li\u003e\n\u003cli\u003eEasy to Use: Our silica desiccant beads are stored in a sealed plastic container for long-term preservation and protection. During use,you can put the silica beads in organza bags, muslin bags, or any other breathable bags to use and observe, so that they can effectively play their role.\u003c\/li\u003e\n\u003cli\u003eWidely Application: Reusable desiccant beads can be widely used in daily life. You can use it to effectively prevent moisture damage to 3D printer filament, Electronic Devices, Camera, Documents, Jewelry, Gun Safe, clothes and many other valuables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cdiv\u003e \u003cdiv\u003e \u003ch2\u003eProduct description\u003c\/h2\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003eSilica Gel Desiccant\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ch3\u003e Orange Desiccant Beads \u003c\/h3\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e 5LB \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Weight \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e 2LB \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Color \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Special Feature \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e 5LB \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Weight \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e 5LB \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Color \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Special Feature \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003ctable\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e 5LB \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Weight \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e 10LB \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Color \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Orange \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Special Feature \u003c\/h3\u003e \u003c\/td\u003e \u003ctd\u003e \u003ch3\u003e Portable \u003c\/h3\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/table\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003col\u003e \u003cli\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003eSilica Gel Desiccant\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003eSilica Gel Desiccant\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/li\u003e \u003cli\u003e \u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003eSilica Gel Desiccant\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/li\u003e \u003c\/ol\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"Stay Ready To 3D Print","offers":[{"title":"2Lb","offer_id":43841981481069,"sku":"B0F6L7PS6X","price":20.21,"currency_code":"USD","in_stock":true},{"title":"5Lb","offer_id":43841981513837,"sku":"B0F6L847J2","price":31.12,"currency_code":"USD","in_stock":true},{"title":"10Lb","offer_id":43841981546605,"sku":"B0FL1MLH76","price":42.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/71hB_oQgK2L._SL1500.jpg?v=1767138421"},{"product_id":"pei-build-plate-double-sided-textured-pei-flexible-holographic-removal-spring-steel-sheet-plate-many-sizes-styles-bambu-lab-prusa-anycubic-etc","title":"PEI Build Plate, Double Sided Textured PEI Flexible, Holographic Removal Spring Steel Sheet Plate (Many Sizes \u0026 Styles) Bambu Lab, Prusa, Anycubic, Etc...","description":"\u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003eTextured PEI Spring Steel Build Plate for FDM 3D Printers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDelivers strong first-layer adhesion, easy flex-off print removal, no glue required, and consistent results across PLA, PETG, ABS, TPU, and more.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eA textured \u003cstrong\u003ePEI spring steel build plate\u003c\/strong\u003e is one of the most effective upgrades you can make to improve print success and reduce frustration. The powder-coated PEI surface grips filament reliably when hot, then releases cleanly once cooled—no scraping, tape, or adhesives needed.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy This Build Plate Improves Your Prints\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\u003cstrong\u003eExcellent first-layer adhesion\u003c\/strong\u003e without glue or sprays\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\u003cstrong\u003eFlex-to-release spring steel\u003c\/strong\u003e makes print removal effortless\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\u003cstrong\u003eTextured PEI surface\u003c\/strong\u003e reduces warping and corner lift\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eMaintains \u003cstrong\u003eflatness and dimensional accuracy\u003c\/strong\u003e\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eClean, consistent bottom finish on printed parts\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\n\u003cp\u003eProper setup ensures maximum adhesion and easy removal.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eStay Ready Recommendation\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eIf you want fewer failed prints, easier removals, and cleaner results—this build plate delivers. It’s a simple upgrade that makes every print smoother from start to finish.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cstrong\u003eSetup Tips for Best Results\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eRe-level your bed when switching surfaces\u003c\/p\u003e\n\n\u003cp\u003eClean occasionally with isopropyl alcohol\u003c\/p\u003e\n\n\u003cp\u003eJust level correctly and print.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eOptional Visual Upgrade: Holographic Print Effects\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eSome compatible spring steel systems support \u003cstrong\u003eholographic surface sheets\u003c\/strong\u003e that use \u003cstrong\u003ediffraction grating technology\u003c\/strong\u003e. This micro-pattern diffracts light, transferring a subtle rainbow or holographic effect onto the bottom of your print.\u003c\/p\u003e\n\n\u003cp\u003eCosmetic effect only\u003c\/p\u003e\n\n\u003cp\u003eDoes not weaken prints\u003c\/p\u003e\n\n\u003cp\u003eGreat for display pieces, logos, and decorative parts\u003c\/p\u003e\n\n\u003cp\u003eSuitable for most FDM 3D printers with heated beds.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eNo Adhesives. No Mess.\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eForget glue sticks, painter’s tape, or hairspray.\u003c\/p\u003e\n\n\u003cp\u003eFaster setup between prints\u003c\/p\u003e\n\n\u003cp\u003eCleaner print bottoms\u003c\/p\u003e\n\n\u003cp\u003eLess maintenance\u003c\/p\u003e\n\n\u003cp\u003eMore consistent results\u003c\/p\u003e\n\n\u003cp\u003eBuilt to handle everyday printing without degrading over time.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWide Material Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003eWorks great with most common and advanced filaments, including:\u003c\/p\u003e\n\n\u003cp\u003ePLA \/ PLA+\u003c\/p\u003e\n\n\u003cp\u003ePETG\u003c\/p\u003e\n\n\u003cp\u003eABS\u003c\/p\u003e\n\n\u003cp\u003eTPU\u003c\/p\u003e\n\n\u003cp\u003eASA\u003c\/p\u003e\n\n\u003cp\u003eNylon and more\u003c\/p\u003e\n\n\u003cp\u003eThis surface enhances adhesion without negatively affecting tolerances or print quality.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eDurable, Heat-Resistant Construction\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003cp\u003ePowder-coated PEI surface\u003c\/p\u003e\n\n\u003cp\u003eSpring steel core for flexibility and strength\u003c\/p\u003e\n\n\u003cp\u003eDesigned for repeated heating cycles\u003c\/p\u003e\n\n\u003cp\u003eResistant to wear, pressure, and abrasion\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Double Sided Textured Pei \/ Prusa Mk3 253.8X241Mm","offer_id":43842161442925,"sku":"B0D5XYTRFT","price":18.08,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Pei \/ Kobra 2 230X230Mm","offer_id":43842161475693,"sku":"B0DH2GH4HM","price":12.15,"currency_code":"USD","in_stock":true},{"title":"Peo+Pet \/ Bambu 257X257Mm","offer_id":43842161508461,"sku":"B0DLW6TD3D","price":22.82,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Pei \/ Kobra 3 256X265Mm","offer_id":43842161541229,"sku":"B0DHCBVCTM","price":12.15,"currency_code":"USD","in_stock":true},{"title":"Smooth Pet + Textured Pei \/ Bambu 257X257Mm","offer_id":43842161573997,"sku":"B0D3PW1KYJ","price":19.27,"currency_code":"USD","in_stock":true},{"title":"Peo +Pet \/ H2D 355X346.5Mm","offer_id":43842161606765,"sku":"B0F2MXDKXW","price":41.79,"currency_code":"USD","in_stock":true},{"title":"Smooth Pet + Textured Pei \/ Kobra S1 264X276Mm","offer_id":43842161639533,"sku":"B0DZ27K8WJ","price":19.27,"currency_code":"USD","in_stock":true},{"title":"Kaleidoscope Pey+Textured Pei \/ Bambu 257X257Mm","offer_id":43842161672301,"sku":"B0DB4HCKDF","price":19.27,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Pei \/ 5M \/5M Pro 235X235Mm","offer_id":43842161705069,"sku":"B0DP4KSB8S","price":18.08,"currency_code":"USD","in_stock":true},{"title":"Peo +Pet \/ Kobra S1 264X276Mm","offer_id":43842161737837,"sku":"B0F938MQ6R","price":19.27,"currency_code":"USD","in_stock":true},{"title":"Letter+Number Version \/ Bambu 257X257Mm","offer_id":43842161770605,"sku":"B0DLW67YZP","price":12.15,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Golden Pei \/ K1\/K1C 235Mm","offer_id":43842161803373,"sku":"B0FR4J5QPR","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Smooth Pet + Textured Pei \/ 5M \/5M Pro 235X235Mm","offer_id":43842161836141,"sku":"B0DP6MFH24","price":19.27,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Pei \/ Kobra S1 264X276Mm","offer_id":43842161868909,"sku":"B0DZ28SQN8","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Double Sided Textured Golden Pei \/ Bambu 257X257Mm","offer_id":43842161901677,"sku":"B0CBH3B8GT","price":16.9,"currency_code":"USD","in_stock":true},{"title":"Peo +Pet \/ 5M \/5M Pro 235X235Mm","offer_id":43842161934445,"sku":"B0DXFD6D1Z","price":20.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/81n0JPXzJnL._SL1500.jpg?v=1767149892"},{"product_id":"creality-3d-printer-tool-kit-74pcs-assembly-removal-filament-cutting-etc","title":"Creality 3D Printer Tool Kit, 74Pcs Assembly, Removal, Filament Cutting, etc...","description":"\u003cp\u003e\u003cspan style=\"font-size:18px;\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e【Professional Versatility \u0026amp; Wide Application】Disassemble, assemble, connect, grind, cut, cleaning, scrape, shovel.This 3D Printer Tool Wrap Kit Pro contains the tools you need for 3D printing, such as screwdriver and wrench tools, model machining tools, nozzle cleaning tools and other machining tools. Perfect for 3D printing beginners and professionals.\u003c\/li\u003e\n\t\u003cli\u003e【Model Handling \u0026amp; Processing Tools】Chamfer knife with 360° rotatable blade, for precisely refining edges of artwork. Engraving knife and files for easy handling of different locations on the model surface, edges, corners, etc. Additionally, the nipper can help remove excess material, burrs, and model supports. Metal scrapers can separate the model from the printing platform.\u003c\/li\u003e\n\t\u003cli\u003e【3D Printer Tool Kit Package Includes】Multifunctional Wrench, Open -ended Wrench, Metal Spatula, Pointed-Nose Pliers, Nipper, Engraving Knife (5PCS Blades and 1 Handle), 1.5 mm Nozzle Cleaner, Metal Cleaning Brush, Socket Wrench, Tubing Cutter, Straight Tweezers, Bent Tweezers, Suction Cup, Magnetic Mat, Plastic Blade, Deburring Tool Handle, Screwdriver Handle, 100mm Long Metal Extension Rod, 6mm Socket and 10*0.38mm Needles, 3*Files, 2*Deburring Blade.\u003c\/li\u003e\n\t\u003cli\u003e【Various-sized Nozzle Cleaner】3d printing tool kit for quick cleaning of residual filaments. 150mm φ1.5mm needle allows cleaning residual filaments from various nozzles and extruders. 10pcs 0.38mm nozzle cleaners allow quickly cleaning residual filaments from nozzles.\u003c\/li\u003e\n\t\u003cli\u003e【Multi-functional Screwdriver Set】Complete Specifications, Wide Applicability. 34pcs chromium-vanadium steel nickel-plated screwdriver bits, for addressing challenges with ease. Universal swivel hose, for reaching every nook and cranny.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"3D Printer Tool Kit","offer_id":43842171338861,"sku":"B0CS6MLCWK","price":39.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/acbbd63decd664fe7ea6ad71600975d8.jpg?v=1767150636"},{"product_id":"62pcs-3d-printer-tool-kit-3d-post-processing-accessories-with-hand-drill-deburring-tool-cutter-needle-files-scrapers-brushes-tweezers-and-nozzle-cleaning","title":"62PCS 3D Printer Tool Kit, 3D Post-Processing Accessories with Hand Drill, Deburring Tool, Cutter, Needle Files, Scrapers, Brushes, Tweezers, and Nozzle Cleaning","description":"\u003cp\u003e\u003cspan style=\"font-size:18px;\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eComprehensive 3D Printing Tool Kit: This all-in-one post-processing set includes a hand drill with 10 bits, deburring tool, wire cutter, needle files srt, scrapers, tweezers, brushes, cleaning needles, gloves, and a storage bag—designed to meet the needs of hobbyists and professionals\u003c\/li\u003e\n\t\u003cli\u003eSupport Removal \u0026amp; Cleaning Brushes: This versatile set includes essential tools like a hand drill for clean hole-making in printed models,, a deburring tool for smoothing rough edges, and wire cutters for support removal. Multiple brushes ensure thorough cleaning of your printer parts and finished models\u003c\/li\u003e\n\t\u003cli\u003eSmooth Trimming \u0026amp; Finishing: Needle files, scrapers, and sanding pads help refine rough surfaces, smooth out layer lines, Cutters and tweezers remove the extra supports, achieve professional-quality finishes on FDM and SLA prints\u003c\/li\u003e\n\t\u003cli\u003eGift for 3D Printing hobbyist \u0026amp; DIY Makers: Whether for a hobbyist or model builder, this versatile tool kit makes a thoughtful and practical gift. In addition to 3D printing post-processing, it’s also suitable for miniature crafting, plastic modeling, and other precision DIY projects\u003c\/li\u003e\n\t\u003cli\u003eReliable After-Sales Support : If you have any questions or issues, our dedicated customer service team is here to help with fast, professional support—ensuring a smooth experience from start to finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eProduct description\u003c\/h2\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAll-in-One Post-Processing Kit for 3D Printing\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cstrong\u003eGloves\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eBreathable and sweat-absorbing for long use\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eNon-slip grip for precise work\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eShields your hands from sharp tools or materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003e\u003cstrong\u003eStainless Steel Tweezers\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eFine tips for precise gripping\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eAnti-slip design for steady handling\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eResistant to rust and wear for long-term use\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003e\u003cstrong\u003e3D Print Polishing Pad\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eMulti-layer sanding pads for smooth finishes\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eHigh-Density Foam Layer\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eIdeal for PLA, resin, and detailed edges\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch4\u003e\u003cstrong\u003eManual Hand Drill\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003ePrecision hand drill for delicate work\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eAnti-slip grip for control\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eGreat for models, crafts, and small parts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003e\u003cstrong\u003e3D set for Post-Processing, Maintenance, and Model Finishing\u003c\/strong\u003e\u003c\/h3\u003e\n\n\u003ch4\u003eIdeal for Makers, Hobbyists, and DIY Enthusiasts\u003c\/h4\u003e\n\n\u003cp\u003eThis comprehensive tool kit makes a smart, practical gift for those who love crafting, printing, and precision work — from beginners to pros.\u003c\/p\u003e\n\n\u003ch4\u003eCrafted for Durability and Precision\u003c\/h4\u003e\n\n\u003cp\u003eEach tool is made from premium materials, designed for accuracy, comfort, and long-lasting use throughout your printing journey.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cem\u003e\u003cstrong\u003eWhy Choose This 3D Tool Set?\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h4\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003ePortable Waterproof Storage Bag \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eNeedle Files for Smooth Finishing \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eTweezers for Fine Detail Work \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eMulti-Surface Cleaning Brush Set \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003eSteel Scraper For tough print removal \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003e\u003cspan\u003ePlastic scrapers for gentle removal \u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Stay Ready To 3D Print","offers":[{"title":"Black Bag 62Pcs","offer_id":43842183233645,"sku":"B0F7GGMS2W","price":29.58,"currency_code":"USD","in_stock":true},{"title":"Black Box 62Pcs","offer_id":43842183266413,"sku":"B0F7GCLZPV","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/61LnvtVAOwL._SL1000.jpg?v=1767150843"},{"product_id":"2025-new-official-creality-filament-dryer-box-2-0-with-fans-upgraded-1kg-3d-printer-material-dehydrator-keep-materials-dry-during-printing","title":"2025 New Official Creality Filament Dryer Box 2.0 with Fans Upgraded 1KG 3D Printer Material Dehydrator Keep Materials Dry during Printing","description":"\u003cp\u003e\u003cspan style=\"font-size:18px;\"\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e【Upgraded Design】Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360° inside the chamber, evenly heating the entire chamber. It can be heated to 65°C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50\/60Hz\u003c\/li\u003e\n\t\u003cli\u003e【Improved Print Quality】3D printing filaments are hygroscopic, moisture can cause printing failure. After using filament dryer box, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality\u003c\/li\u003e\n\t\u003cli\u003e【Easy to Use】Creality filament storage box requires no assembly and can be used right out of the dry box. Display screen and knob make it easy to operate. Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions. After drying, it is best to store the filament in a vacuum bag to keep it dry and ready for use\u003c\/li\u003e\n\t\u003cli\u003e【Personalized Drying Time\/Temperature Setting】You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45℃~65℃, and the time setting range is 0~24 hours\u003c\/li\u003e\n\t\u003cli\u003e【Wide Compatibility】Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm\/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eProduct Parameters\u003c\/h3\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eProduct name \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eCreality filament dry box 2.0 \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eProduct size \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e237x266x99mm \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eNet weight \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e1060g \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eFilament diameter \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e1.75mm\/2.85mm \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ctable\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eInput voltage \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e110V 50\/60Hz \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eRated power \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e145W \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eTemperature control range \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e45°C-65°C \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003eHeating duration \u003c\/span\u003e\u003c\/td\u003e\n\t\t\t\u003ctd\u003e\u003cspan\u003e0-24 hours \u003c\/span\u003e\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Creality","offers":[{"title":"Dryer Box 2.0","offer_id":43842187755629,"sku":"B0CJ2YVVFM","price":51.85,"currency_code":"USD","in_stock":true},{"title":"Space Pi Plus","offer_id":43842187788397,"sku":"B0CY1S7MMK","price":113.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/619bIcpajvL._AC_SL1000.jpg?v=1767151226"},{"product_id":"fanttik-t1-max-soldering-iron-kit-7-seconds-fast-heating390-f-840-auto-sleep-4-precision-soldering-tips-360-swivel-stand-soldering-iron-for-precision-repair","title":"Fanttik T1 Max Soldering Iron Kit 7 Seconds Fast Heating(390°F-840℉), Auto Sleep, 4 Precision Soldering Tips, 360° Swivel Stand, Soldering Iron for Precision Repair","description":"\u003cp\u003e\u003cspan style=\"font-size:22px;\"\u003e\u003cstrong\u003eProduct description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExtreme Tinning: Fanttik T1 MAX is equipped with 4pcs tailor-made C210 (C210-I, C210-IS, 2pcs C210-K) rapid heating soldering tips, long service life, and anti-oxidation. Achieve a fast heating in 7 seconds, reduce the waiting time, and improve the efficiency of your repair tasks.\u003c\/li\u003e\n\t\u003cli\u003eCompatible DC\/AC Modes: With the built-in 2600mAh battery in wireless mode, the maximum DC Output is 12W for up to 60 minutes at 840°F (450°C). Its small size is not bound by space, and maintenance work can be carried out anywhere. In wired mode, the maximum AC Output is 16W. It can be powered by a charger or mobile power supply with a Type-C port.\u003c\/li\u003e\n\t\u003cli\u003eIntelligent Gravity Sensing: After stopping working for 30 seconds, the soldering iron will enter sleep mode. T1 MAX will automatically restart to heat up to the temperature you set when picking it up again. NOTE: The red light flashes while heating, and the green light stays on when heating is complete.\u003c\/li\u003e\n\t\u003cli\u003e6 Temperature Levels: The tail knob of the soldering iron has 6 levels for adjusting the temperature. Can be adjusted accurately and efficiently for different work scenes in the range between 390°F to 840°F (200°C to 450°C) so as not to damage heat-resistant components.\u003c\/li\u003e\n\t\u003cli\u003eCompact Structural with Stability: Equipped with an aluminum storage stand, the base tray can be pressed to pop up to store the welding head. The exquisite industrial design allows the soldering iron to be displayed on the table like an aesthetic piece, keeping the workbench clean, beautiful, comfortable, and pleasant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003clink\u003e\n\u003clink\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThe video showcases the product in use.\u003c\/span\u003e\u003cspan\u003eThe video guides you through product setup.\u003c\/span\u003e\u003cspan\u003eThe video compares multiple products.\u003c\/span\u003e\u003cspan\u003eThe video shows the product being unpacked.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch1\u003eWhat's in the box of the T1 MAX?\u003c\/h1\u003e\nSee Product Photo\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch1\u003e\u003cspan style=\"font-size:22px;\"\u003e\u003cstrong\u003eSpecial Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch1\u003e\u003cspan style=\"font-size:12px;\"\u003eLED Light Indication\u003c\/span\u003e\u003c\/h1\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003col\u003e\n\t\u003cli\u003e\n\t\u003cdiv\u003e\n\t\u003cdiv\u003e\n\t\u003cdiv\u003e\n\t\u003cdiv\u003e\n\t\u003cdiv\u003e\n\t\u003cdiv\u003e\n\t\u003ch1\u003e\u003cspan style=\"font-size:12px;\"\u003eSimple and easy to use design\u003c\/span\u003e\u003c\/h1\u003e\n\t\u003c\/div\u003e\n\n\t\u003cdiv\u003e\n\t\u003cp\u003ePress and hold the button to activate the soldering iron.\u003c\/p\u003e\n\n\t\u003cp\u003eWork conditions are indicated by three lights (Red\/Green\/White).\u003c\/p\u003e\n\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\t\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch1\u003eUsage Scenario\u003c\/h1\u003e\n\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003ePlease pay attention to safety when using, so as not to be burned by the high temperature of the soldering iron tip！！！\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003ch3\u003e \u003c\/h3\u003e\n\n\t\u003cp\u003e\u003cspan\u003eWhat can I do to have a better weld? \u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003cp\u003e1. The soldering temperature should be 660°F-750°F, depending on the size of the solder point.\u003c\/p\u003e\n\n\t\u003cp\u003e2. Use a damp sponge to clean the soldering iron tip before soldering to make sure it is clean and free of impurities.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003ch3\u003e \u003c\/h3\u003e\n\n\t\u003cp\u003e\u003cspan\u003eWhat temperature should be selected for SMD component welding? \u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003cp\u003eFor SMD component soldering, you can choose 570°F to ensure soldering quality without causing the pad to fall off.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003ch3\u003e \u003c\/h3\u003e\n\n\t\u003cp\u003e\u003cspan\u003eWhat temperature should be selected for plug-in components, flying wires? \u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003cp\u003eFor plug-in components, flying wires and other working conditions, you can choose 660°F to ensure soldering speed and efficiency.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003ch3\u003e \u003c\/h3\u003e\n\n\t\u003cp\u003e\u003cspan\u003eWhat temperature should be selected for component disassembly? \u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003cp\u003eFor component removal and pad cleaning, you can choose 750°F, which makes the tin point fall off more smoothly.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003ch3\u003e \u003c\/h3\u003e\n\n\t\u003cp\u003e\u003cspan\u003eWhat is the function of AUTO SLEEP mode? \u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003cp\u003e1. When you put the soldering iron on the bracket for 30 seconds without gravity change, it will enter sleep mode.\u003c\/p\u003e\n\n\t\u003cp\u003e2. If you do not use it for 15 minutes, it will automatically shut down. This function is added for safer and more energy-saving use.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","brand":"fanttik","offers":[{"title":"Default Title","offer_id":43885025198189,"sku":"B0D41ZMDPD","price":60.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/61HLbADstvL._AC_SL1500.jpg?v=1768778945"},{"product_id":"cr-scan-ferret-pro-3d-scanner","title":"CR-Scan Ferret Pro 3D Scanner","description":"\u003cul\u003e\n\u003cli\u003e0.1mm accuracy\u003c\/li\u003e\n\u003cli\u003eWireless scanning via WiFi 6\u003c\/li\u003e\n\u003cli\u003eAnti-shake 3D imaging technique dramatically improves the scanning success rate\u003c\/li\u003e\n\u003cli\u003e24-bit full-color scanning captures the original colors and brings every intricate detail to life\u003c\/li\u003e\n\u003cli\u003eScan black\/metal(non-reflective) objects without scanning spray\u003c\/li\u003e\n\u003cli\u003eSupport Mac, iOS, Win, and Android.\u003c\/li\u003e\n\u003cli\u003eOutdoor scanning allows scanning anywhere(＜30k lux)\u003c\/li\u003e\n\u003cli\u003eHigh-quality \u0026amp; fast scanning\u003c\/li\u003e\n\u003cli\u003ePortable and easy to use\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv data-lark-html-role=\"root\"\u003e\u003ca href=\"https:\/\/store.creality.com\/blogs\/tutorial\/creality-ferret-complete-guide-unboxing-to-success\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cspan class=\"text-only\" data-eleid=\"21\"\u003e\u003cspan class=\"text-only\"\u003e⚡️\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cu\u003e\u003cspan class=\"text-only\" data-eleid=\"22\"\u003e\u003cspan class=\"text-only\"\u003eThe Complete Beginner’s Guide to Ferret Series: From Unboxing to Success\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv data-lark-html-role=\"root\"\u003e\n\u003cspan class=\"text-only ecff566f\" data-eleid=\"24\"\u003e\u003cspan class=\"text-only\"\u003e❤️\u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.facebook.com\/groups\/creality3dscanner\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cu\u003e\u003cspan class=\"text-only\" data-eleid=\"25\"\u003e\u003cspan class=\"text-only\"\u003eGet fast, expert advice from our official community and make the best choice!\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Creality Official Store","offers":[{"title":"Default Title","offer_id":43922325078125,"sku":"4008050043","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/CR-Scan_Ferret_Pro_1.png?v=1769568304"},{"product_id":"nozzle-maintenance-kit","title":"Nozzle Maintenance Kit","description":"\u003cbody\u003e\n\n\n    \u003cmeta charset=\"UTF-8\"\u003e\n    \u003cmeta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\"\u003e\n    \u003ctitle\u003eCollapsible Sections with Rounded Corners\u003c\/title\u003e\n    \u003cstyle\u003e\n        body {\n            font-family: Helvetica, Arial, sans-serif;\n            margin: 0;\n            padding: 0;\n            box-sizing: border-box;\n            color: black;\n            overflow-x: hidden;\n        }\n\n        a {\n            color: blue;\n            text-decoration: none;\n        }\n\n        a:hover {\n            text-decoration: underline;\n        }\n\n        .tab-links {\n            display: flex;\n            justify-content: space-between;\n            margin-bottom: 0;\n            background: #fff;\n            padding: 0;\n        }\n\n        .tab-links button {\n            flex-grow: 1;\n            padding: 12px 20px;\n            border: none;\n            background-color: #f2f2f2;\n            cursor: pointer;\n            outline: none;\n            border-top-left-radius: 8px;\n            border-top-right-radius: 8px;\n            transition: background-color 0.3s;\n            border-bottom: 2px solid transparent;\n            color: black;\n        }\n\n        .tab-links button:hover {\n            background-color: orange;\n        }\n\n        .tab-links button.active {\n            background-color: #ccc;\n            border-bottom-color: #ccc;\n            font-weight: bold;\n        }\n\n        .tab-content {\n            display: none;\n            padding: 20px;\n            border: 1px solid #ccc;\n            border-radius: 8px;\n            border-top-left-radius: 0;\n            border-top-right-radius: 0;\n        }\n\n        .tab-content.active {\n            display: block;\n        }\n\n        .collapsible {\n            background-color: #f2f2f2;\n            color: black;\n            cursor: pointer;\n            padding: 10px;\n            width: 100%;\n            border: none;\n            text-align: left;\n            outline: none;\n            font-size: 15px;\n            display: flex;\n            justify-content: flex-start;\n            align-items: center;\n            transition: background-color 0.3s;\n            border-top: 1px solid white;\n            border-radius: 8px;\n        }\n\n        .collapsible:first-of-type {\n            border-top: none;\n        }\n\n        .collapsible.active {\n            background-color: #e2e2e2;\n        }\n\n        .collapsible span {\n            font-size: 18px;\n            margin-right: 10px;\n            transition: transform 0.3s ease;\n        }\n\n        .collapsible.active span {\n            transform: rotate(45deg);\n        }\n\n        .collapsible-content {\n            max-height: 0;\n            padding: 0 18px;\n            overflow: hidden;\n            background-color: white;\n            border-top: none;\n            border-radius: 8px;\n            transition: max-height 0.3s ease-out, padding 0.3s ease-out;\n        }\n\n        .collapsible-content.active {\n            max-height: 1000px;\n            padding: 18px;\n        }\n\n        @media (max-width: 600px) {\n            .tab-links button {\n                padding: 15px 10px;\n            }\n\n            .tab-content {\n                padding: 15px;\n            }\n        }\n\n        @media (max-width: 600px) {\n            .tab-content img {\n                width: 100%;\n                height: auto;\n                object-fit: contain;\n                max-width: 100%;\n            }\n        }\n\n        \/* Add styling for video size *\/\n        .video-wrapper {\n            position: relative;\n            padding-bottom: 56.25%; \/* 16:9 aspect ratio *\/\n            height: 0;\n            overflow: hidden;\n            max-width: 100%;\n            background: #000;\n        }\n\n        .video-wrapper iframe {\n            position: absolute;\n            top: 0;\n            left: 0;\n            width: 100%;\n            height: 100%;\n        }\n\n        \/* Grey box styling for downloads *\/\n        .gray-box {\n            background-color: #f2f2f2;\n            padding: 10px;\n            border-radius: 8px;\n            margin-bottom: 10px;\n            display: inline-block;\n        }\n\n        .gray-box a {\n            color: black;\n            text-decoration: none;\n        }\n\n        .gray-box a:hover {\n            text-decoration: underline;\n        }\n    \u003c\/style\u003e\n\n\n\n    \u003cdiv class=\"tab-links\"\u003e\n        \u003cbutton class=\"tab-link active\" onclick=\"openTab(event, 'description')\"\u003eDescription\u003c\/button\u003e\n        \u003cbutton class=\"tab-link\" onclick=\"openTab(event, 'specifications')\"\u003eContents\u003c\/button\u003e\n        \u003cbutton class=\"tab-link\" onclick=\"openTab(event, 'reviews')\"\u003eUse\u003c\/button\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"tab-content active\" id=\"description\"\u003e\n        \u003cp\u003eIf you have an FDM printer, cleaning your nozzle as part of regular printer maintenance is the best way to avoid clogs ranging from minor inconvenience to a full hot-end engulfing blob. Whether you are looking to maintain your nozzle or you need to clear an existing clog, the Nozzle Maintenance Kit has everything you need.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"tab-content\" id=\"specifications\"\u003e\n        \u003cb\u003eThe Nozzle Maintenance Kit contains\u003c\/b\u003e:\n        \u003cul\u003e\n            \u003cli\u003eØ3.80 Nozzle Cleaner\u003c\/li\u003e\n            \u003cli\u003eØ1.75 Nozzle Cleaner\u003c\/li\u003e\n            \u003cli\u003eSet of five 0.4 Nozzle Cleaning Needles\u003c\/li\u003e\n            \u003cli\u003e2 Meters of Cleaning Filament\u003c\/li\u003e\n            \u003cli\u003ePneumatic Depressor\u003c\/li\u003e\n            \u003cli\u003eMini Slap\u003c\/li\u003e\n            \u003cli\u003eSet of 3 Nozzle Wrenches: 10mm, 7mm, and 6mm\u003c\/li\u003e\n        \u003c\/ul\u003e\n     \n    \u003c\/div\u003e\n\n    \u003cdiv class=\"tab-content\" id=\"reviews\"\u003e\n         \u003cp\u003eFor more info, visit \u003ca href=\"https:\/\/www.whambamsystems.com\/pages\/nozzle-maintenance-kit-support-page\" target=\"_blank\"\u003e FDM and Resin Tools support page\u003c\/a\u003e.\u003c\/p\u003e\n        \u003cb\u003eDownloads\u003c\/b\u003e:\u003cbr\u003e\n        \u003cdiv class=\"gray-box\"\u003e\n    \u003ca href=\"https:\/\/cults3d.com\/en\/3d-model\/tool\/tool-kit-holder-for-fdm-printers\" style=\"color: blue;\" target=\"blank\"\u003eFree STL for tool holder\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n       \u003cb\u003e\n  \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=0s\" target=\"_blank\" style=\"text-decoration: none;\"\u003e\n    How to clean your hot end\n  \u003c\/a\u003e\n\u003c\/b\u003e:\n\u003cbr\u003e\n\n       \u003cul\u003e\n         \u003cli\u003e0:00 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=0s\" target=\"_blank\"\u003e Introduction\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e0:33 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=33s\" target=\"_blank\"\u003e First Technique with Nozzle Needles\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e1:32 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=92s\" target=\"_blank\"\u003e Clearing jams with Nozzle Cleaners 3.8 and 1.7\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e1:54 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=114s\" target=\"_blank\"\u003e Pneumatic Depressor to remove Bowden Tube\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e4:07 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=247s\" target=\"_blank\"\u003e Cleaning Filament\u003c\/a\u003e\n\u003c\/li\u003e\n          \u003cli\u003e5:04 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=304s\" target=\"_blank\"\u003e Trim PTFE4\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e5:50 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=350s\" target=\"_blank\"\u003e Remove Hot-End from the printer for deeper cleaning\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e5:54 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=354s\" target=\"_blank\"\u003e Cleaning a Bambu Lab Hot-End\u003c\/a\u003e\n\u003c\/li\u003e\n          \u003cli\u003e7:30 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=450s\" target=\"_blank\"\u003e Cleaning a direct drive Hot-End\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e10:23 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=623s\" target=\"_blank\"\u003e Cleaning Hot-Ends on a bench\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e11:39 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=699s\" target=\"_blank\"\u003e Heating and cleaning out the Hot-End\u003c\/a\u003e\n\u003c\/li\u003e\n         \u003cli\u003e14:00 \u003ca href=\"https:\/\/www.youtube.com\/watch?v=dMQSCCa3xF0\u0026amp;t=840s\" target=\"_blank\"\u003e Correct Re-Assembly of a Hot-End, Nozzle, Heat Throat\u003c\/a\u003e\n\u003c\/li\u003e\n       \u003c\/ul\u003e  \n       \n    \u003c\/div\u003e\n\n    \u003cscript\u003e\n        function openTab(event, tabName) {\n            var i, tabcontent, tablinks;\n            tabcontent = document.getElementsByClassName(\"tab-content\");\n            for (i = 0; i \u003c tabcontent.length; i++) {\n                tabcontent[i].classList.remove(\"active\");\n            }\n            tablinks = document.getElementsByClassName(\"tab-link\");\n            for (i = 0; i \u003c tablinks.length; i++) {\n                tablinks[i].classList.remove(\"active\");\n            }\n            document.getElementById(tabName).classList.add(\"active\");\n            event.currentTarget.classList.add(\"active\");\n        }\n\n        document.addEventListener(\"DOMContentLoaded\", function () {\n            var collapsibles = document.getElementsByClassName(\"collapsible\");\n            for (var i = 0; i \u003c collapsibles.length; i++) {\n                collapsibles[i].addEventListener(\"click\", function () {\n                    this.classList.toggle(\"active\");\n                    var content = this.nextElementSibling;\n                    content.classList.toggle(\"active\");\n                });\n            }\n        });\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"Wham Bam Systems","offers":[{"title":"Default Title","offer_id":44060827582573,"sku":"NOZZ_KIT","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/WB-ToolKit-8583sq.jpg?v=1770921279"},{"product_id":"beacon-probe-eddy-current-surface-scanner-for-3d-printers","title":"Beacon Probe Eddy Current Surface Scanner for 3D Printers","description":"\u003cp\u003eWorks with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/docs.kalico.gg\/\"\u003eKalico\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.klipper3d.org\/\"\u003eKlipper\u003c\/a\u003e. Comes fully assembled and includes a 6ft USB cable.\u003c\/p\u003e\n\u003cp\u003eNormal: \u003cspan\u003eBest for Annex or StealthBurner Printers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLow Profile: \u003cspan\u003eBest for VzBot, RatRig, or K3 Frostbite Printers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRequires a conductive surface or substrate on printer bed to work. Bed stacks that include oversized fixed magnets are not recommended and\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003emay not work\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ewith Beacon. BTT Pi and BTT Manta are known to cause damage to Beacon devices, they must be used with an inline hub or a different SBC.\u003c\/p\u003e\n\u003ch4\u003eEddy current surface scanner for 3D printers:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong\u003eNative displacement output\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– no z motion necessary for sensing\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong\u003eScan mode mesh\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– dense grid sampling in a matter of seconds\u003c\/li\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong\u003eLow thermal drift\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– minimized by design, active compensation for everything else\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRevH:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli dir=\"auto\"\u003e\n\u003cstrong\u003eHigh Temp Accelerometer\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– measurement up to 100C, standby up to 115C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePrinter Compatibility:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware\u003c\/strong\u003e: Klipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection\u003c\/strong\u003e: USB to Single Board Computer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed\u003c\/strong\u003e: Conductive surface or substrate, 400um or thicker. Bare steel, WHAM BAM, PEI coated or laminated steel, etc. Use with beds employing large or oversized fixed magnets is not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Custom USB cable (6ft)\u003c\/li\u003e\n\u003cli\u003e1x Beacon board (main PCB, sensing PCB, headers, cable connector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVariations – this is important for mounting Beacon to your tool head appropriately:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormal\u003c\/strong\u003e: main PCB and sensing PCB are assembled flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Profile\u003c\/strong\u003e: main PCB and sensing PCB are assembled flat (as well as the cable connector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWarranty:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e30-day standard warranty (following the date of delivery to you)\u003c\/li\u003e\n\u003cli\u003eUsing a BTT Pi or BTT Manta board with the Beacon without an inline hub voids the warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Beacon H Low Profile","offer_id":44776551514221,"sku":"WES2565LOW","price":79.99,"currency_code":"USD","in_stock":true},{"title":"Beacon H Normal","offer_id":44776551546989,"sku":"WES2566NOR","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/beacon-probe-eddy-current-surface-scanner-for-3d-printers-west3d-3d-printing-supplies-beacon3d-795045.png?v=1773323217"},{"product_id":"keenovo-silicone-heater-heating-pad","title":"Keenovo Silicone Heater \/ Heating Pad","description":"\u003cp\u003eWant an alternative? \u003cstrong\u003e\u003ca href=\"https:\/\/west3d.com\/products\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection?_pos=7\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eCheck out our new Edge to Edge heaters with Thermal Protection.\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp on a no-name product with unverified quality and reliability. This is why we went directly to the source to bring you an assortment of heater pads from Keenovo.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the \"Fermio\" style pads for Voron builds, go to our Fermio product page: \u003ca href=\"https:\/\/west3d.com\/products\/keenovo-fermio-style-silicone-heater-heating-pad\" title=\"Keenovo Fermio Style Heater Pad\"\u003eLINK\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor the pads listed on this page, the 300mm version includes a 150C built-in thermostat from Keenovo.\u003c\/p\u003e\n\u003cp\u003eWe carry multiple sizes. Generally, you want a heater pad pad that is a little smaller than your build plate. For instance:\u003c\/p\u003e\n\u003cp\u003eIf you have a:\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 300mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 240mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 200mm pad\u003c\/p\u003e\n\u003cp\u003e120mm build plate go with a 100mm pad\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease review excerpt from Keenovo's Product Page:\u003c\/p\u003e\n\u003ch2\u003eDESCRIPTION:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWonderful silicone heater for your 3D printer build plate heating upgrade.\u003c\/li\u003e\n\u003cli\u003ePlease choose the suitable version for your printer. For \u003cstrong\u003eVORON\u003c\/strong\u003e, please check our popular pads of 100mm x 100mm, 200mm x 200mm, 240mm x 240mm\/250mm x 250mm, 300mm x 300mm for \u003cstrong\u003eVORON\u003c\/strong\u003e V0 120, V1\/V2 250, V1\/V2 300, V1\/V2 350 respectively.\u003c\/li\u003e\n\u003cli\u003eAll pads come with 3M adhesive backing for excellent and easy mounting.\u003c\/li\u003e\n\u003cli\u003eA free NTC 100K thermistor ( Beta 25\/50 3950K-1%, Click \u003ca title=\"NTC-Thermistor-R-T-Table\" href=\"https:\/\/www.keenovo.com\/NTC-Thermistor-R-T-Table.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHere\u003c\/a\u003e for the R-T datasheet) is included except for those specified otherwise (such as K type thermocouple or PT100-we use HAYASHI A class PT100). Choose type 11 or 13 in Marlin firmware for the thermistor.\u003c\/li\u003e\n\u003cli\u003eVersatile and may be used in many other applications.\u003c\/li\u003e\n\u003cli\u003eKeenovo carries a full range of standard and custom designed silicone heaters, contact us if you need a special heater made.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater does not come with a Keenovo Digital controller, you may want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with Keenovo Digital Controller, please read the Controller Configuration Manual, especially the \"Advanced Setting\" part, carefully BEFORE making any changes on the controller.\u003c\/li\u003e\n\u003cli\u003eThe controller unit is 100% brand new. Yet due to manufacturing reasons, stains, dusts or scratches may be present on the silicone case. It may also fit less tight as shown in the picture. Please consider this before the purchase.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with a built-in thermostat, please kindly note that the thermostat, being mechanical (bi-metal and snap action), should not be considered as a precise temperature control device, but as an auto-regulating and over-heating protection device. Its action temperatures may be subjected to certain tolerances or hysteresis due to factors such as heater power rating, ambient temperatures and heat consumption\/loss rate etc.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003cli\u003eDo not cut the heater.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"100x100 60W 24V","offer_id":44776551350381,"sku":"KEE0285","price":27.99,"currency_code":"USD","in_stock":true},{"title":"200x200 500W 110V","offer_id":44776551383149,"sku":"KEE0286","price":44.99,"currency_code":"USD","in_stock":true},{"title":"200x200 200W 110V","offer_id":44776551415917,"sku":"KEE0289","price":39.99,"currency_code":"USD","in_stock":true},{"title":"240x240 600W 120V","offer_id":44776551448685,"sku":"KEE0287","price":55.99,"currency_code":"USD","in_stock":true},{"title":"300x300 750W 120v + 150C Built-in Thermostat","offer_id":44776551481453,"sku":"KEE0288","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/keenovo-silicone-heater-heating-pad-west3d-printing-keenovo-446314.jpg?v=1773323217"},{"product_id":"bondtech-lgx-lite-v2-large-gears-extruder-with-motor","title":"Bondtech LGX Lite V2 Large Gears eXtruder (with Motor)","description":"\u003cul\u003e\n\u003cli\u003eTighter \u003cb\u003etolerances\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eimproved \u003cb\u003ebuild quality\u003c\/b\u003e:\n\u003cul\u003e\n\u003cli\u003esturdier \u003cb\u003e2 parts housing design\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eprecise \u003cb\u003estepper motor centering\u003c\/b\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eextra \u003cb\u003emounting point\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eincreased \u003cb\u003eresistance to heat\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003emicro form factor\u003c\/b\u003e, featherweight and small footprint;\u003c\/li\u003e\n\u003cli\u003eenhanced \u003cb\u003efilament grip;\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eand that Bondtech \u003cb\u003eblack Look\u003c\/b\u003e : )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes full size \u003cb\u003eLGX\u003c\/b\u003e Large Gears, maintenance windows and filament tension lever with 3 presets (open; rigid; flexible). This extruder only supports \u003cb\u003e1.75 mm\u003c\/b\u003e size filament.\u003c\/p\u003e\n\u003cp\u003eThe Bondtech \u003cb\u003eLGX Lite\u003c\/b\u003e V2 is a filament feeder based on the LGX® Large Gears eXtruder and uses \u003cb\u003eBondtech’s new Dual Drive Technology based on larger drive gears\u003c\/b\u003e.\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003csmall\u003eEach \u003cb\u003eLGX Lite V2\u003c\/b\u003e extruder is supplied with:\u003c\/small\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003cb\u003eLGX Lite V2\u003c\/b\u003e feeder;\u003c\/li\u003e\n\u003cli\u003e1x Nema14 Round 20mm pancake stepper motor (mounted on extruder)\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1m long lead cable\u003c\/li\u003e\n\u003cli\u003ewith JST-XH 4-pin connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e1x 2mm Hex Key (recommended tool)\u003c\/li\u003e\n\u003cli\u003e1x Powered By Bondtech sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso shipping with additional accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Push-fit collar (inserted)\u003c\/li\u003e\n\u003cli\u003e1x 30mm PTFE tube to use in the PTFE Tube Adapter\u003c\/li\u003e\n\u003cli\u003e8x M3 square nuts for reinforcing mounting holes (inserted)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003ch4\u003e8 features of this Bondtech eXtruder:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLarger drive wheels, for increased filament grip;\u003c\/li\u003e\n\u003cli\u003eFilament pre-tension lever, for repeated results;\u003c\/li\u003e\n\u003cli\u003eDrive wheels’ maintenance windows, for easy cleaning;\u003c\/li\u003e\n\u003cli\u003eCompact, light \u0026amp; centered filament path, for increased performance and compatibility;\u003c\/li\u003e\n\u003cli\u003eMultiple mounting hole patterns, for easy and flexible setup;\u003c\/li\u003e\n\u003cli\u003eCompatible with Nema14 round stepper motors;\u003c\/li\u003e\n\u003cli\u003eCraft boxes without bleaching \u0026amp; no coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e3D Printed Housing using PA12 GF\u003c\/h5\u003e\n\u003cp\u003eThe housing parts are professionally printed with polyamide 12 Glass Filled for maximum strength, precision and higher temperature resistance.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551219309,"sku":"BON3576","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-lgx-lite-v2-large-gears-extruder-west3d-3d-printing-supplies-bondtech-5052583.jpg?v=1773323217"},{"product_id":"3dmakerparts-silicone-heater-heating-pad-for-3d-printers","title":"3DMakerParts Silicone Heater \/ Heating Pad for 3D Printers","description":"\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 320mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 270mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 220mm pad\u003c\/p\u003e\n\u003cp\u003e IMPORTANT NOTES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eYou may  (ok you really should) want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe controller unit is 100% brand new. Yet due to manufacturing reasons, stains, dusts or scratches may be present on the silicone case. It may also fit less tight as shown in the picture. Please consider this before the purchase.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with a built-in thermostat, please kindly note that the thermostat, being mechanical (bi-metal and snap action), should not be considered as a precise temperature control device, but as an auto-regulating and over-heating protection device. Its action temperatures may be subjected to certain tolerances or hysteresis due to factors such as heater power rating, ambient temperatures and heat consumption\/loss rate etc.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003cli\u003eDo not cut the heater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThermistor type NTC 100K. In Klipper use Generic 3950\u003c\/strong\u003e\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"220x220 300W 120V + 150C Built-in Thermostat","offer_id":44776551252077,"sku":"3DM1245","price":34.99,"currency_code":"USD","in_stock":true},{"title":"270x270 500W 120V + 150C Built-in Thermostat","offer_id":44776551284845,"sku":"3DM1246","price":49.99,"currency_code":"USD","in_stock":true},{"title":"320x320 750W 120v + 150C Built-in Thermostat","offer_id":44776551317613,"sku":"3DM1247","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/3dmakerparts-silicone-heater-heating-pad-for-3d-printers-west3d-printing-3dmakerparts-992582.jpg?v=1773323217"},{"product_id":"oem-sherpa-all-metal-ridga-v2-set-by-bondtech","title":"OEM Sherpa All Metal RIDGA V2 Set by Bondtech","description":"\u003cp\u003e\u003csmall\u003eOriginal Bondtech OEM set of parts to use on the\u003cbr\u003e\u003cb\u003eSherpa Mini, Sherpa Micro and Sherpa Heavy\u003c\/b\u003e\u003cbr\u003efrom the \u003cb\u003eAnnex Engineering\u003c\/b\u003e group.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003eWith Bondtech original 1.75\/5.0 mm set of All-Metal RIDGA and secondary Drive Gear.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision cnc-machined.\u003c\/li\u003e\n\u003cli\u003eSharp teeth for maximum grip on the filament.\u003c\/li\u003e\n\u003cli\u003eThe perfect choice for a high-performance feeding system.\u003c\/li\u003e\n\u003cli\u003eExtremely high wear resistance for use with abrasive filaments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551579757,"sku":"BON3817","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/oem-sherpa-all-metal-ridga-v2-set-by-bondtech-west3d-3d-printing-supplies-bondtech-1137315.webp?v=1773323217"},{"product_id":"bondtech-bmg-extruder-idga","title":"Bondtech BMG Extruder IDGA","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eNew Version WITH IDGA Shipping Now!\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003ewith new white plastic main gear and integrated drive gear for lower run-out\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eNow including the new white plastic main gear and assembled with a new method to reduce run-out and improve 3D print´s surface quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Bondtech \u003cb\u003eBMG®\u003c\/b\u003e extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe \u003cb\u003eBMG®\u003c\/b\u003e works in both bowden and direct driven applications. Built-in fitting for the E3D hotend and fits Nema17 stepper motors. \u003cb\u003ePlease mind the bowden adapter is not included.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe housing parts are professionally SLS printed in nylon for maximum strength and precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThis extruder only supports 1.75 mm size filament.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551645293,"sku":"BON2657","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-bmg-extruder-idga-west3d-3d-printing-supplies-bondtech-118587.webp?v=1773323217"},{"product_id":"keenovo-fermio-style-silicone-heater-heating-pad","title":"Keenovo Fermio Style Silicone Heater \/ Heating Pad","description":"\u003cp\u003eWant an alternative? \u003ca href=\"https:\/\/west3d.com\/products\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection?_pos=7\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eCheck out our new Edge to Edge heaters with Thermal Protection.\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp on a no-name product with unverified quality and reliability. This is why we went directly to the source to bring you an assortment of heater pads from Keenovo.\u003c\/p\u003e\n\u003cp\u003eThis page is for the \"Fermio\" style Keenovo Heater Pads, which has cutouts specifically designed to work around the spec slots and cutouts for the Voron build plates. (Note, some kit build plates are not made to spec and this may not fit on those. Buy a spec build plate such to work with this. The West3D carried build plates will work with these).\u003c\/p\u003e\n\u003cp\u003eThe cutouts allow these heater pads to be larger, and therefore apply heat to a greater surface area of your build plate than a traditional pad.\u003c\/p\u003e\n\u003cp\u003eFor added safety all heaters come with a self resetting bi-metal 150C thermal fuse. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation).\u003c\/p\u003e\n\u003cp\u003eThermistor used is a NTC 100K thermistor (Beta 25\/50 3950K-1%)\u003c\/p\u003e\n\u003cp\u003eWe carry multiple sizes. Generally, you want a heater pad pad that is a little smaller than your build plate. For instance:\u003c\/p\u003e\n\u003cp\u003eIf you have a:\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 340mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 290mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 240mm pad\u003c\/p\u003e\n\u003cp\u003e120mm build plate go with a 110mm pad\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cstrong\u003eWe DO offer pads without adhesive, if you want those choose the “no adhesive option.” Please note if you do choose this option you will need to find a way to proper secure these to the aluminum bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease review excerpt from Keenovo's Product Page:\u003c\/p\u003e\n\u003ch2\u003eDESCRIPTION:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlease choose the \u003cstrong\u003esuitable voltage\u003c\/strong\u003e \u003cstrong\u003eversion\u003c\/strong\u003e for your printer. For buyers within the EU, please buy \u003ca href=\"https:\/\/fermio.xyz\/en\/electronics\/silicone-heaters\/300\/keenovo-silicone-heatmat\" target=\"_blank\"\u003ethe 220V\u003c\/a\u003e version directly from Fermio Labs.\u003c\/li\u003e\n\u003cli\u003eAll pads come with 3M adhesive backing for excellent and easy mounting. Select the no adhesive option if you do not wish to have the 3m backing.\u003c\/li\u003e\n\u003cli\u003eComes with a free NTC 100K thermistor ( Beta 25\/50 3950K-1%, Click \u003ca title=\"NTC-Thermistor-R-T-Table\" href=\"https:\/\/www.keenovo.com\/NTC-Thermistor-R-T-Table.pdf\" target=\"_blank\"\u003eHere\u003c\/a\u003e for the R-T datasheet. Choose type 11 or 13 in Marlin firmware.) unless specified otherwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eBefore purchase, please kindly check if the hole pattern fits your build plate.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater does not come with a Keenovo Digital controller, you may want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"110x110 60W 24V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":44776552169581,"sku":"KEE0290","price":29.99,"currency_code":"USD","in_stock":true},{"title":"110x110 60W 24V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":44776552202349,"sku":"KEE0291","price":33.99,"currency_code":"USD","in_stock":true},{"title":"240x240 300W 120V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":44776552235117,"sku":"KEE0292","price":62.99,"currency_code":"USD","in_stock":true},{"title":"240x240 300W 120V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":44776552267885,"sku":"KEE0293","price":65.99,"currency_code":"USD","in_stock":true},{"title":"290x290 500W 120V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":44776552300653,"sku":"KEE0294","price":79.99,"currency_code":"USD","in_stock":true},{"title":"290x290 500W 120V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":44776552333421,"sku":"KEE0295","price":83.99,"currency_code":"USD","in_stock":true},{"title":"340x340 750W 120v + 150C Built-in Thermostat \/ YES - standard option","offer_id":44776552366189,"sku":"KEE0296","price":102.99,"currency_code":"USD","in_stock":true},{"title":"340x340 750W 120v + 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":44776552398957,"sku":"KEE0297","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/keenovo-fermio-style-silicone-heater-heating-pad-west3d-printing-keenovo-455909.gif?v=1773323218"},{"product_id":"bondtech-bmg-m-extruder-idga-for-mosquito","title":"Bondtech BMG-M Extruder IDGA for Mosquito","description":"\u003cblockquote\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eNew Version WITH IDGA Shipping Now!\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003ewith new white plastic main gear and integrated drive gear for lower run-out\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eDesigned for Mosquito\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis extruder is optimized for the Mosquito \/ Mosquito Magnum hotends with and integrated torque lock system to make the interface very strong and makes nozzle changes a breeze.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eMade with PA12 by SLS\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe housing parts are professionally SLS printed in nylon for maximum strength and precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThis extruder only supports 1.75 mm size filament.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551612525,"sku":"BON2660","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-bmg-m-extruder-idga-for-mosquito-west3d-3d-printing-supplies-bondtech-756274.jpg?v=1773323217"},{"product_id":"universal-180-300w-320w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates","title":"Universal 180 300W \/ 320W 120V Silicone Heater Edge to Edge for PFA Micron and Salad Fork 180mm Build Plates -","description":"\u003cp\u003eThis heater is exclusively designed by West3D to fit edge to edge on build plates for the 180mm sized Salad Fork and Micron. \u003c\/p\u003e\n\u003cp\u003eThis heater is no slouch, at 300W or 320W this heats up quick, and the Lohmann adhesive is rated for long term use at high temperature.\u003c\/p\u003e\n\u003cp\u003eThe heater uses a NTC 100K Thermistor, and features both the heater and thermistor elevated from the bottom of the silicon pad to allow for traversing any obstacles that may present themselves. The heater and thermistor wire are long enough for any 180mm size build (by quite a bit!). \u003c\/p\u003e\n\u003cp\u003eThe second variant (320W) is similar to the first, but we have increased the wattage to 320W AND it includes a self-resetting thermal switch (CF79F-150A) which provides added protection in the event of a thermal runaway (above 150C). Please note, the switch is meant as a backup to a lower rated fuse, please do not assume this will provide 100% protection. The fuse does sit up higher and may require a spacer or slightly higher standoff on Salad Fork.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"300W Standard Edge to Edge","offer_id":44776551710829,"sku":"WES1658","price":32.99,"currency_code":"USD","in_stock":false},{"title":"320W Thermal Switching Edge to Edge","offer_id":44776551743597,"sku":"WES1659","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/universal-180-300w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates-west3d-3d-printing-supplies-west3d-878022.jpg?v=1773323218"},{"product_id":"bondtech-cht-volcano-high-flow-nozzles-vol-nickel-coated-brass-various-sizes","title":"Bondtech CHT Volcano High Flow Nozzles VOL Nickel Coated Brass Various Sizes","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eThis Bondtech CHT ® VOL\u003csmall\u003ecano\u003c\/small\u003e nozzle \u003cb\u003eincreases the melting capacity\u003c\/b\u003e of your hotend, to \u003cb\u003ebuild faster\u003c\/b\u003e and to \u003cb\u003esave your time\u003c\/b\u003e. It also \u003cb\u003eimproves the layer adhesion\u003c\/b\u003e of your 3D prints to create \u003cb\u003estronger parts\u003c\/b\u003e.\u003cbr\u003eFind the \u003ci\u003eCompatibility List\u003c\/i\u003e and \u003ci\u003eProduct ALERTS\u003c\/i\u003e tabs below.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrass body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.60, 0.80, 1.0 and 1.2mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 80%;\"\u003e\n\u003cdiv id=\"accordion-description-content\" class=\"accordion-inner\" aria-labelledby=\"accordion-description-label\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-656545047\"\u003e\n\u003cdiv id=\"col-736623921\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_167479171\"\u003e\n\u003cdiv class=\"img-inner dark\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/bondtech_600-C-CHT-VOL-175-T_cht-coated-brass-vol-nozzles-triad_3750x2500-scaled.jpg?v=1742340940\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-557521299\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"gap-1537833883\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-1735322586\"\u003e\n\u003cdiv id=\"col-1997280294\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\n\u003ch3 style=\"color: red;\"\u003e30% gains or more!!?? Check the White Paper:\u003c\/h3\u003e\n\u003c\/a\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGains apply to 1.75 \/ 2.85mm rigid materials and 2.85mm flexible filaments only.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTo achieve meaningful volumetric flow gains use at least 0.6mm diameter nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gap-1383901364\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003ch5\u003eMain \u003cb\u003eBondtech CHT ®\u003c\/b\u003e Advantages\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003cli\u003eVolcano (M6×1×14.5×21)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT ® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT ® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Bondtech_600-C-CHT-MOS-175-XX.pdf?v=1742060859\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":44776551940205,"sku":"BON2646.4M","price":24.9,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":44776551972973,"sku":"BON2647.5M","price":24.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":44776552005741,"sku":"BON2648.6M","price":24.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":44776552038509,"sku":"BON2649.8M","price":24.9,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":44776552071277,"sku":"BON26501MM","price":24.9,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":44776552104045,"sku":"BON26511.2","price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-cht-volcano-high-flow-nozzles-vol-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-636156.jpg?v=1773323217"},{"product_id":"universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection-ac-bed-heater","title":"Universal 120V Silicone Heater Edge to Edge Heaters with Thermal Switch Protection AC Bed Heater","description":"\u003cp\u003eOur Performance for All 180 Series heater is exclusively designed by West3D to fit edge to edge on Voron style build plates (but will fit any printer that has the appropriate size build plate). Looking for a heater for your 180mm Printers for Ants? \u003ca href=\"https:\/\/west3d.com\/products\/universal-180-300w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates?_pos=10\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eHere you go!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese heaters are no slouch and \u003cstrong\u003eheat quickly\u003c\/strong\u003e due to their higher than average wattage, and will stay adhered without too much smell due to the \u003cstrong\u003eLohmann adhesive\u003c\/strong\u003e rated for long term use at high temperature. Lastly, unlike other heaters in the industry, our heaters come with \u003cstrong\u003ebackup thermal protection\u003c\/strong\u003e through the use of a self-resetting switch (CF79F-150A rated for 150C). Please note, the switch is meant as a backup to a lower rated fuse, please do not assume this will provide 100% protection, and never operate the printer when you're not able to monitor and shut off in the event of a thermal anomaly.\u003c\/p\u003e\n\u003cp\u003eThe heater uses a NTC 100K Thermistor, and features both the heater and thermistor elevated from the bottom of the silicon pad to allow for traversing any obstacles that may present themselves. The heater and thermistor wire are long enough for almost any build. Set your printer config in Klipper to Generic 3950 thermistor type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - these are sized within 1 mm of the standard build plate size please make sure your surface is larger than the heater or size down. For Voron sizes, build plates are typically 5mm larger than the stated size and these are designed to work perfectly for standard aluminum build plates.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur heaters come from a factory that maintains various certifications, including CE. These are not labeled on the heaters themselves as we intend these to be purchased only within the United States (due to voltage requirements).\u003c\/p\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eBefore purchase, please kindly check if the hole pattern fits your build plate.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca rel=\"noopener\" title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003ePlease kindly check this post on \u003cstrong\u003e\u003ca rel=\"noopener\" title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e from Keenovo\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"116x116mm 120W (for 120+mm build surfaces)","offer_id":44776551809133,"sku":"WES1765","price":25.99,"currency_code":"USD","in_stock":false},{"title":"249x249mm 350W (for 250+ mm build surfaces)","offer_id":44776551841901,"sku":"WES1766","price":54.99,"currency_code":"USD","in_stock":true},{"title":"299x299mm 550W (for 300+mm build surfaces)","offer_id":44776551874669,"sku":"WES1767","price":69.99,"currency_code":"USD","in_stock":false},{"title":"349x349mm 800W (for 350+mm build surfaces)","offer_id":44776551907437,"sku":"WES1768","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection-west3d-3d-printing-supplies-west3d-779788.jpg?v=1773323218"},{"product_id":"bondtech-ddx-v3-for-creality-idga","title":"Bondtech DDX v3 For Creality IDGA","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eNew Version WITH IDGA Shipping Now!\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003ewith new white plastic main gear and integrated drive gear for lower run-out\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eNow including the new white plastic main gear and assembled with a new method to reduce run-out and improve 3D print´s surface quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe Bondtech DDX Direct Drive eXtruder for Creality 3D printers is an upgrade kit that replaces the original bowden extruder with a direct drive extruder setup. It is a high-performance Dual Drive extruder based on the BMG Bondtech Mini Geared.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eMultiple Hotends Compatibility\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis model was created to be compatible with the original hotend of each compatible Creality model, except with the hotend in CR-10 V2\/V3. Users may upgrade the hotend to \u003ca href=\"https:\/\/www.bondtech.se\/en\/product-category\/hotends\/slice-engineering-hotends\/copperhead\/\"\u003eCopperhead™\u003c\/a\u003e or \u003ca href=\"https:\/\/www.bondtech.se\/en\/product-category\/hotends\/slice-engineering-hotends\/mosquito\/\"\u003eMosquito™\u003c\/a\u003e. It may be used with Micro Swiss hotends if using a hotend adapter, as to use the DDX with any hotend other then stock, a specific adapter set is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eA DDX v3 Adapter set is required to use this product.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551776365,"sku":"BON2659","price":89.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-ddx-v3-for-creality-idga-west3d-3d-printing-supplies-bondtech-731866.webp?v=1773323217"},{"product_id":"bondtech-lgx-steel-drive-train-upgrade-set","title":"Bondtech LGX Steel Drive Train Upgrade Set","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003ePush Harder! Full Steel Ahead!\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eSet of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder :\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eLGX\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eLGX Lite\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eLGX Lite Mirrored\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eLGX Lite V2\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eRecommended to feed Engineering grade thermoplastics.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eTo use our \u003cb\u003eLGX extruders\u003c\/b\u003e above our default recommendations:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003ewith thicker mounting plates;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003eat higher environment temperatures;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003eat higher stepper motor currents.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776551678061,"sku":"BON2661","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-lgx-steel-drive-train-upgrade-set-west3d-3d-printing-supplies-bondtech-634899.webp?v=1773323217"},{"product_id":"bondtech-cht-high-flow-bi-metal-abrasive-resistant-nozzles-m6-v6-various-sizes","title":"Bondtech CHT High Flow Bi-Metal Abrasive Resistant Nozzles M6 (V6) Various Sizes","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eThis Bondtech CHT BiMetal ™ RepRap M6 nozzle \u003cb\u003eincreases the melting capacity\u003c\/b\u003e of your hotend, to \u003cb\u003ebuild faster\u003c\/b\u003eand to \u003cb\u003esave your time\u003c\/b\u003e. It also \u003cb\u003eimproves the layer adhesion\u003c\/b\u003e of your 3D prints to create \u003cb\u003estronger parts\u003c\/b\u003e. Important to notice this nozzle is \u003cb\u003eresistant to particle or fiber loaded abrasive materials\u003c\/b\u003e.\u003cbr\u003eFind the compatibility list and product alerts tabs below.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCopper body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardened Steel inserts\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.60, 0.80, and 1.0mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 80%;\"\u003e\n\u003cdiv id=\"accordion-description-content\" class=\"accordion-inner\" aria-labelledby=\"accordion-description-label\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-656545047\"\u003e\n\u003cdiv id=\"col-736623921\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_167479171\"\u003e\n\u003cdiv class=\"img-inner dark\"\u003e\u003cimg decoding=\"async\" width=\"1020\" height=\"574\" src=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-1200x675.jpg\" class=\"attachment-large size-large\" alt=\"\" srcset=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-1200x675.jpg 1200w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-380x214.jpg 380w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-600x338.jpg 600w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-400x225.jpg 400w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-768x432.jpg 768w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080-1536x864.jpg 1536w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2021\/09\/bondtech_600-A-CHT-MOS-175-T_cht-bimetal-reprap-coated-nozzles-triad_1920x1080.jpg 1920w\" sizes=\"(max-width: 1020px) 100vw, 1020px\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-557521299\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"gap-1537833883\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-1735322586\"\u003e\n\u003cdiv id=\"col-1997280294\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\n\u003ch3 style=\"color: red;\"\u003e30% gains or more!!?? Check the White Paper:\u003c\/h3\u003e\n\u003c\/a\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGains apply to 1.75 \/ 2.85mm rigid materials and 2.85mm flexible filaments only.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTo achieve meaningful volumetric flow gains use at least 0.6mm diameter nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gap-1383901364\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003ch5\u003eMain \u003cb\u003eBondtech CHT ®\u003c\/b\u003e Advantages\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003cli\u003eVolcano (M6×1×14.5×21)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT ® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT ® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Bondtech_600-C-CHT-MOS-175-XX.pdf?v=1742060859\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":44776552431725,"sku":"BON2632.4M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":44776552464493,"sku":"BON2637.5M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":44776552497261,"sku":"BON2638.6M","price":39.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":44776552530029,"sku":"BON2639.8M","price":39.9,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":44776552562797,"sku":"BON26401MM","price":39.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-cht-high-flow-bi-metal-abrasive-resistant-nozzles-m6-v6-various-sizes-west3d-3d-printing-supplies-bondtech-988867.jpg?v=1773323217"},{"product_id":"high-temp-magnet-sheet-graviflex-200-schallenkammer-strong-hold-magnetic-base-with-adhesive-for-flex-plates","title":"High Temp Magnet Sheet - GraviFlex� 200 - Schallenkammer strong hold Magnetic Base with adhesive for Flex Plates","description":"\u003cp\u003eThese high quality magnet sheets have a strong magnetic force and can operate at high temperatures which makes them perfect for 3D printer flex plates.\u003c\/p\u003e\n\u003cp\u003eYou don't need to stress about aligning these magnet sheets perfectly when installing them on to your aluminum plate.\u003c\/p\u003e\n\u003cp\u003eThis is an anisotropic*, multi-pole magnet sheet with a max constant operating temperature of 120°C (short-term up to 200°C). The magnet sheet comes with \u003cspan data-mce-fragment=\"1\"\u003eLohman \u003c\/span\u003eadhesive pre-applied to one side.\u003c\/p\u003e\n\u003cp\u003eMade in Germany by Schallenkammer Magnetsysteme.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"2238652\" _msthash=\"3481426\"\u003eMaterial thickness: 1.0 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"2686450\" _msthash=\"3481894\"\u003eRemanence Br: 243–263 mT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"4657159\" _msthash=\"3482050\"\u003eCoercive field strength HcB: 179–203 kA\/m\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"4658966\" _msthash=\"3563625\"\u003eCoercive field strength HcJ: 211–257 kA\/m\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"4596761\" _msthash=\"3563794\"\u003eEnergy product (W×H)max.: 11.1–13.5 kJ\/m³\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan _msttexthash=\"772616\" _msthash=\"3563963\"\u003eAdhesive force: approx. 130 g\/cm²*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan _msttexthash=\"772616\" _msthash=\"3563963\"\u003eAnisotropic - Magnetized in a predetermined direction leading to higher adhesive force than regular isotropic magnets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan _msttexthash=\"772616\" _msthash=\"3563963\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Datenblatt_200_E_jpg_480x480.webp?v=1680214554\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"125x125mm","offer_id":44776552923245,"sku":"SCH1210","price":8.99,"currency_code":"USD","in_stock":true},{"title":"165x165mm","offer_id":44776552956013,"sku":"SCH2543165","price":16.99,"currency_code":"USD","in_stock":false},{"title":"185x185mm","offer_id":44776552988781,"sku":"SCH2542185","price":19.99,"currency_code":"USD","in_stock":true},{"title":"255x255mm","offer_id":44776553021549,"sku":"SCH1209","price":24.99,"currency_code":"USD","in_stock":true},{"title":"305x305mm","offer_id":44776553054317,"sku":"SCH1208","price":39.99,"currency_code":"USD","in_stock":true},{"title":"355x355mm","offer_id":44776553087085,"sku":"SCH1207","price":49.99,"currency_code":"USD","in_stock":false},{"title":"605x605mm","offer_id":44776553119853,"sku":"SCH4047605","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/high-temp-magnet-sheet-graviflex-200-schallenkammer-strong-hold-magnetic-base-with-adhesive-for-flex-plates-west3d-printing-schallenkammer-415995.jpg?v=1773323217"},{"product_id":"bondtech-lgx-pro-metal-1-75-extruder","title":"Bondtech LGX Pro Metal 1.75 eXtruder","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eA \u003cstrong\u003efull metal\u003c\/strong\u003e stronger and more robust LGX Large Gears eXtruder for industrial and high temperature applications with \u003cstrong\u003e1.75mm filaments\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHarder\u003c\/b\u003e : steel drive train;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFaster\u003c\/b\u003e : higher max feed rate;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStronger\u003c\/b\u003e : more push force;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTougher\u003c\/b\u003e : Aluminum housing;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaner\u003c\/b\u003e : sober design.\u003c\/li\u003e\n\u003cli\u003eEven \u003cb\u003eBetter\u003c\/b\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row row-small align-middle\" id=\"row-710906265\"\u003e\n\u003cdiv id=\"col-897429754\" class=\"col medium-6 small-12 large-6\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cblockquote\u003e\n\u003cp\u003eEach \u003cb\u003eLGX® Pro Metal 1.75\u003c\/b\u003e extruder is supplied with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x \u003cb\u003eLGX® Pro Metal 1.75mm\u003c\/b\u003e feeder;\u003c\/li\u003e\n\u003cli\u003e1x Custom Nema17 30mm pancake stepper motor;\u003c\/li\u003e\n\u003cli\u003e1x Metal Push-in fitting M7 4mm;\u003c\/li\u003e\n\u003cli\u003e1x 2mm Hex Key (recommended tool);\u003c\/li\u003e\n\u003cli\u003e1x Powered By Bondtech sticker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso shipping with additional accessories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4x M3x23 mm Stud with 5mm Hex with M3x4 thread;\u003c\/li\u003e\n\u003cli\u003e30mm PTFE tube to use in the Direct Drive Interface Plug.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003e\u003cstrong\u003eThis extruder only supports 1.75 mm size filament.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-1688411590\" class=\"col medium-6 small-12 large-6\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_204258211\"\u003e\u003ca class=\"image-lightbox lightbox-gallery\" title=\"\" href=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-1200x800.jpg\"\u003e\n\u003cdiv class=\"img-inner image-cover dark\"\u003e\u003cimg decoding=\"async\" width=\"1020\" height=\"680\" src=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-1200x800.jpg\" class=\"attachment-large size-large\" alt=\"\" title=\"bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500\" srcset=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-1200x800.jpg 1200w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-400x267.jpg 400w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-600x400.jpg 600w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-768x512.jpg 768w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-1536x1024.jpg 1536w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-2048x1365.jpg 2048w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder_3750x2500-scaled.jpg 1980w\" sizes=\"(max-width: 1020px) 100vw, 1020px\"\u003e\u003c\/div\u003e\n\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eLGX Pro Metal 1.75 and its packaging\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"gap-1334622643\" class=\"gap-element clearfix\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row\" id=\"row-1559582594\"\u003e\n\u003cdiv id=\"col-1780384580\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_535036552\"\u003e\n\u003cdiv class=\"img-inner image-cover dark\"\u003e\u003cimg decoding=\"async\" width=\"1020\" height=\"680\" src=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-1200x800.jpg\" class=\"attachment-large size-large\" alt=\"\" srcset=\"https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-1200x800.jpg 1200w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-400x267.jpg 400w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-600x400.jpg 600w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-768x512.jpg 768w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-1536x1024.jpg 1536w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-2048x1365.jpg 2048w, https:\/\/www.bondtech.se\/wp-content\/uploads\/2024\/04\/bondtech_EXT01LGX41036_LGX-PRO-Metal-eXtruder-4_3750x2500-scaled.jpg 1980w\" sizes=\"(max-width: 1020px) 100vw, 1020px\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-2023176979\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"text-2809916347\" class=\"text\"\u003e\n\u003cp\u003eThe \u003cb\u003eLGX® Pro Metal eXtruder\u003c\/b\u003e uses \u003cb\u003eBondtech’s new Dual Drive Technology\u003c\/b\u003e based on \u003cb\u003elarge drive gears\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch4\u003e10 cool features of the Bondtech LGX Pro Metal :\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum housing\u003c\/li\u003e\n\u003cli\u003eStrong 30mm stepper motor\u003c\/li\u003e\n\u003cli\u003eLarger drive wheels, for increased filament grip;\u003c\/li\u003e\n\u003cli\u003eNew filament pre-tension lever – open + 4 positions – for repeated results;\u003c\/li\u003e\n\u003cli\u003eMulti-function interface socket, for tool or application quick swap;\u003c\/li\u003e\n\u003cli\u003eCompact, light \u0026amp; symmetric design, for increased performance and compatibility;\u003c\/li\u003e\n\u003cli\u003eMultiple mounting hole patterns, for easy and flexible setup;\u003c\/li\u003e\n\u003cli\u003eFull Hardened Steel Drive Train;\u003c\/li\u003e\n\u003cli\u003eSupport longer hotends with the Aluminum Interface Plug;\u003c\/li\u003e\n\u003cli\u003eMore protection against dust or particle saturated industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552136813,"sku":"BON3577","price":242.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-lgx-pro-metal-175-extruder-west3d-3d-printing-supplies-bondtech-8908561.jpg?v=1773323218"},{"product_id":"bondtech-cht-volcano-high-flow-bi-metal-abrasive-resistant-nozzles-vol-various-sizes","title":"Bondtech CHT Volcano High Flow Bi-Metal Abrasive Resistant Nozzles VOL Various Sizes","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003ehis Bondtech CHT BiMetal ™ VOL\u003csmall\u003ecano\u003c\/small\u003e nozzle \u003cb\u003eincreases the melting capacity\u003c\/b\u003e of your hotend, to \u003cb\u003ebuild faster\u003c\/b\u003e and to \u003cb\u003esave your time\u003c\/b\u003e. It also \u003cb\u003eimproves the layer adhesion\u003c\/b\u003e of your 3D prints to create \u003cb\u003estronger parts\u003c\/b\u003e. Important to notice this nozzle is \u003cb\u003eresistant to particle or fiber loaded abrasive materials\u003c\/b\u003e.\u003cbr\u003eFind the compatibility list and product alerts tabs below.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCopper body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardened Steel inserts\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.60, 0.80, and 1.0mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 80%;\"\u003e\n\u003cdiv id=\"accordion-description-content\" class=\"accordion-inner\" aria-labelledby=\"accordion-description-label\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-656545047\"\u003e\n\u003cdiv id=\"col-736623921\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_167479171\"\u003e\n\u003cdiv class=\"img-inner dark\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-557521299\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"gap-1537833883\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-1735322586\"\u003e\n\u003cdiv id=\"col-1997280294\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":44776552595565,"sku":"BON2652.4M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":44776552628333,"sku":"BON2653.5M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":44776552661101,"sku":"BON2654.6M","price":44.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":44776552693869,"sku":"BON2655.8M","price":44.9,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":44776552726637,"sku":"BON26561MM","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-cht-volcano-high-flow-bi-metal-abrasive-resistant-nozzles-vol-various-sizes-west3d-3d-printing-supplies-bondtech-394278.webp?v=1773323218"},{"product_id":"oem-all-metal-ridga-v2-set-by-bondtech","title":"OEM All Metal RIDGA V2 Set by Bondtech","description":"\u003cp\u003e\u003cb\u003eReduce the runout of the main drive gear on your Dual Drive extruder.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.\u003c\/p\u003e\n\u003cp\u003eCompatible with the following Open-Source extruders:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHextrudORT\u003c\/li\u003e\n\u003cli\u003eSherpa Mini, Micro \u0026amp; Heavy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a V2?\u003c\/h3\u003e\n\u003cp\u003eThe OEM RIDGA V2 allows for ideal engagement between main gear and an 8T or 10T motor gear, while retaining a safe distance between the stepper motor and gear assembly.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552857709,"sku":"BON3816","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/oem-all-metal-ridga-v2-set-by-bondtech-west3d-3d-printing-supplies-bondtech-4852872.webp?v=1773323217"},{"product_id":"bmg-idga-retro-fit-set-by-bondtech","title":"BMG IDGA Retro-fit Set by Bondtech","description":"\u003cp\u003eReduce the runout of the main drive gear on your Bondtech BMG Dual Drive extruder.\u003c\/p\u003e\n\u003cp\u003eA very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552759405,"sku":"BON3818","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bmg-idga-retro-fit-set-by-bondtech-west3d-3d-printing-supplies-bondtech-2489758.webp?v=1773323218"},{"product_id":"bondtech-lgx-pro-large-gears-extruder","title":"Bondtech LGX PRO Large Gears eXtruder","description":"\u003cstyle class=\"WebKit-mso-list-quirks-style\"\u003e\n\u003c!--\n\/* Style Definitions *\/\n p.MsoNormal, li.MsoNormal, div.MsoNormal\n\t{mso-style-unhide:no;\n\tmso-style-qformat:yes;\n\tmso-style-parent:\"\";\n\tmargin-top:0in;\n\tmargin-right:0in;\n\tmargin-bottom:8.0pt;\n\tmargin-left:0in;\n\tline-height:115%;\n\tmso-pagination:widow-orphan;\n\tfont-size:12.0pt;\n\tfont-family:\"Aptos\",sans-serif;\n\tmso-ascii-font-family:Aptos;\n\tmso-ascii-theme-font:minor-latin;\n\tmso-fareast-font-family:DengXian;\n\tmso-fareast-theme-font:minor-fareast;\n\tmso-hansi-font-family:Aptos;\n\tmso-hansi-theme-font:minor-latin;\n\tmso-bidi-font-family:Arial;\n\tmso-bidi-theme-font:minor-bidi;\n\tmso-font-kerning:1.0pt;\n\tmso-ligatures:standardcontextual;}\n.MsoChpDefault\n\t{mso-style-type:export-only;\n\tmso-default-props:yes;\n\tfont-family:\"Aptos\",sans-serif;\n\tmso-ascii-font-family:Aptos;\n\tmso-ascii-theme-font:minor-latin;\n\tmso-fareast-font-family:DengXian;\n\tmso-fareast-theme-font:minor-fareast;\n\tmso-hansi-font-family:Aptos;\n\tmso-hansi-theme-font:minor-latin;\n\tmso-bidi-font-family:Arial;\n\tmso-bidi-theme-font:minor-bidi;}\n.MsoPapDefault\n\t{mso-style-type:export-only;\n\tmargin-bottom:8.0pt;\n\tline-height:115%;}\n@page WordSection1\n\t{size:8.5in 11.0in;\n\tmargin:1.0in 1.0in 1.0in 1.0in;\n\tmso-header-margin:.5in;\n\tmso-footer-margin:.5in;\n\tmso-paper-source:0;}\ndiv.WordSection1\n\t{page:WordSection1;}\n \/* List Definitions *\/\n @list l0\n\t{mso-list-id:244463335;\n\tmso-list-template-ids:405978666;}\n@list l0:level1\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Symbol;}\n@list l0:level2\n\t{mso-level-number-format:bullet;\n\tmso-level-text:o;\n\tmso-level-tab-stop:1.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:\"Courier New\";\n\tmso-bidi-font-family:\"Times New Roman\";}\n@list l0:level3\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:1.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level4\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:2.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level5\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:2.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level6\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:3.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level7\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:3.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level8\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:4.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level9\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:4.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n\n--\u003e\n\u003c\/style\u003e\n\u003cp\u003eA stronger and more robust LGX Large Gears eXtruder for industrial application with \u003cb\u003e1.75mm filaments\u003c\/b\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eHarder\u003c\/b\u003e : steel drive train;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFaster\u003c\/b\u003e : higher max feed rate;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStronger\u003c\/b\u003e : more push force;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTougher\u003c\/b\u003e : housing with higher heat tolerance;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaner\u003c\/b\u003e : sober design.\u003c\/li\u003e\n\u003cli\u003eJust \u003cb\u003eBetter\u003c\/b\u003e!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e1x (\u003cb\u003eFREE\u003c\/b\u003e) Aluminum Interface Plug;\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552890477,"sku":"BON2663","price":149.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-lgx-pro-large-gears-extruder-west3d-3d-printing-supplies-bondtech-434708.webp?v=1773323217"},{"product_id":"bondtech-oem-idga-set","title":"Bondtech OEM IDGA Set","description":"\u003cblockquote\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eReduce the runout of the main drive gear on your Dual Drive extruder.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eA very solid, reliable and improved solution from Bondtech that provides a slight improvement to the print surface quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eCompatible only with the following extruders:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003eVoron ClockWork 2 (CW2)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552792173,"sku":"BON2662","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-oem-idga-set-west3d-3d-printing-supplies-bondtech-407629.webp?v=1773323217"},{"product_id":"bondtech-lgx-large-gears-extruder","title":"Bondtech LGX Large Gears eXtruder","description":"\u003cstyle class=\"WebKit-mso-list-quirks-style\"\u003e\n\u003c!--\n\/* Style Definitions *\/\n p.MsoNormal, li.MsoNormal, div.MsoNormal\n\t{mso-style-unhide:no;\n\tmso-style-qformat:yes;\n\tmso-style-parent:\"\";\n\tmargin-top:0in;\n\tmargin-right:0in;\n\tmargin-bottom:8.0pt;\n\tmargin-left:0in;\n\tline-height:115%;\n\tmso-pagination:widow-orphan;\n\tfont-size:12.0pt;\n\tfont-family:\"Aptos\",sans-serif;\n\tmso-ascii-font-family:Aptos;\n\tmso-ascii-theme-font:minor-latin;\n\tmso-fareast-font-family:DengXian;\n\tmso-fareast-theme-font:minor-fareast;\n\tmso-hansi-font-family:Aptos;\n\tmso-hansi-theme-font:minor-latin;\n\tmso-bidi-font-family:Arial;\n\tmso-bidi-theme-font:minor-bidi;\n\tmso-font-kerning:1.0pt;\n\tmso-ligatures:standardcontextual;}\n.MsoChpDefault\n\t{mso-style-type:export-only;\n\tmso-default-props:yes;\n\tfont-family:\"Aptos\",sans-serif;\n\tmso-ascii-font-family:Aptos;\n\tmso-ascii-theme-font:minor-latin;\n\tmso-fareast-font-family:DengXian;\n\tmso-fareast-theme-font:minor-fareast;\n\tmso-hansi-font-family:Aptos;\n\tmso-hansi-theme-font:minor-latin;\n\tmso-bidi-font-family:Arial;\n\tmso-bidi-theme-font:minor-bidi;}\n.MsoPapDefault\n\t{mso-style-type:export-only;\n\tmargin-bottom:8.0pt;\n\tline-height:115%;}\n@page WordSection1\n\t{size:8.5in 11.0in;\n\tmargin:1.0in 1.0in 1.0in 1.0in;\n\tmso-header-margin:.5in;\n\tmso-footer-margin:.5in;\n\tmso-paper-source:0;}\ndiv.WordSection1\n\t{page:WordSection1;}\n \/* List Definitions *\/\n @list l0\n\t{mso-list-id:244463335;\n\tmso-list-template-ids:405978666;}\n@list l0:level1\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Symbol;}\n@list l0:level2\n\t{mso-level-number-format:bullet;\n\tmso-level-text:o;\n\tmso-level-tab-stop:1.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:\"Courier New\";\n\tmso-bidi-font-family:\"Times New Roman\";}\n@list l0:level3\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:1.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level4\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:2.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level5\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:2.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level6\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:3.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level7\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:3.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level8\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:4.0in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n@list l0:level9\n\t{mso-level-number-format:bullet;\n\tmso-level-text:;\n\tmso-level-tab-stop:4.5in;\n\tmso-level-number-position:left;\n\ttext-indent:-.25in;\n\tmso-ansi-font-size:10.0pt;\n\tfont-family:Wingdings;}\n\n--\u003e\n\u003c\/style\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eEach \u003cb\u003eLGX®\u003c\/b\u003e extruder is supplied with:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x \u003cb\u003eLGX®\u003c\/b\u003e feeder;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x Custom Nema17 25mm pancake stepper motor;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x Bowden Interface Plug (with threaded metal push-fit);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x Direct Drive Interface Plug (for Slice Engineering hotends);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x 2mm Hex Key (recommended tool);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x Product Line Information Brochure;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e1x Powered By Bondtech sticker.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e3x M3x30 mm Low Head screws;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e4x M3x18 mm Stud with 5mm Hex with M3x4 thread;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan\u003e·       \u003c\/span\u003e\u003c!--[endif]--\u003e\u003cspan dir=\"LTR\"\u003e\u003c\/span\u003e\u003cspan\u003e30mm PTFE tube to use in the Direct Drive Interface Plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eThis extruder only supports 1.75 mm size filament.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":44776552824941,"sku":"BON2658","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-lgx-large-gears-extruder-west3d-3d-printing-supplies-bondtech-441307.webp?v=1773323218"},{"product_id":"bondtech-cht-high-flow-nozzles-mk8-nickel-coated-brass-various-sizes","title":"Bondtech CHT High Flow Nozzles MK8 Nickel Coated Brass Various Sizes","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eThis Bondtech CHT ® MK8 nozzle \u003cb\u003eincreases the melting capacity\u003c\/b\u003e of your hotend, to \u003cb\u003ebuild faster\u003c\/b\u003e and to \u003cb\u003esave your time\u003c\/b\u003e. It also \u003cb\u003eimproves the layer adhesion\u003c\/b\u003e of your 3D prints to create \u003cb\u003estronger parts\u003c\/b\u003e.\u003cbr\u003eFind the compatibility list and product alerts tabs below.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrass body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.40, 0.60, 0.80, 1.0, 1.4 and 1.8mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 8mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"font-size: 80%;\"\u003e\n\u003cdiv id=\"accordion-description-content\" class=\"accordion-inner\" aria-labelledby=\"accordion-description-label\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-656545047\"\u003e\n\u003cdiv id=\"col-736623921\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_167479171\"\u003e\n\u003cdiv class=\"img-inner dark\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/bondtech_600-C-CHT-MK8-175-T_cht-coated-brass-mk8-nozzles-triad_3750x2500-scaled_jpg.webp?v=1742340614\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-557521299\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"gap-1537833883\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-1735322586\"\u003e\n\u003cdiv id=\"col-1997280294\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\n\u003ch3 style=\"color: red;\"\u003e30% gains or more!!?? Check the White Paper:\u003c\/h3\u003e\n\u003c\/a\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGains apply to 1.75 \/ 2.85mm rigid materials and 2.85mm flexible filaments only.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTo achieve meaningful volumetric flow gains use at least 0.6mm diameter nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gap-1383901364\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003ch5\u003eMain \u003cb\u003eBondtech CHT ®\u003c\/b\u003e Advantages\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003cli\u003eVolcano (M6×1×14.5×21)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT ® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT ® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Bondtech_600-C-CHT-MOS-175-XX.pdf?v=1742060859\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":44776553152621,"sku":"BON2641.4M","price":19.9,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":44776553185389,"sku":"BON2643.6M","price":19.9,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":44776553218157,"sku":"BON2644.8M","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-cht-high-flow-nozzles-mk8-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-719537.webp?v=1773323217"},{"product_id":"bondtech-cht-high-flow-nozzles-m6-v6-nickel-coated-brass-various-sizes","title":"Bondtech CHT High Flow Nozzles M6 (V6) Nickel Coated Brass Various Sizes","description":"\u003cdiv class=\"product-short-description\"\u003e\n\u003cp\u003eThis Bondtech CHT ® RepRap M6 (compatible with V6 style nozzles) (MOS) nozzle \u003cb\u003eincreases the melting capacity\u003c\/b\u003e of your hotend, to \u003cb\u003ebuild faster\u003c\/b\u003e and to \u003cb\u003esave your time\u003c\/b\u003e. It also \u003cb\u003eimproves the layer adhesion\u003c\/b\u003e of your 3D prints to create \u003cb\u003estronger parts\u003c\/b\u003e.\u003cbr\u003eFind the compatibility list and product alerts tabs below.\u003c\/p\u003e\n\u003cdiv style=\"font-size: 80%;\"\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrass body\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNickel Coating\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1 unit per pack\u003c\/b\u003e;\u003c\/li\u003e\n\u003cli\u003eAvailable sizes : 0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.4 and 1.8mm;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptimized\u003c\/b\u003e for 1.75mm filament;\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with\u003c\/b\u003e 2.85mm filament.\u003c\/li\u003e\n\u003cli\u003eRequires 6mm wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv id=\"accordion-description-content\" class=\"accordion-inner\" aria-labelledby=\"accordion-description-label\" style=\"display: block;\"\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-656545047\"\u003e\n\u003cdiv id=\"col-736623921\" class=\"col medium-4 small-12 large-4\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv class=\"img has-hover x md-x lg-x y md-y lg-y\" id=\"image_167479171\"\u003e\n\u003cdiv class=\"img-inner dark\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/bondtech-cht-high-flow-nozzles-m6-v6-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-867549.jpg?v=1742125042\" alt=\"Bondtech CHT High Flow Nozzles M6 (V6) Nickel Coated Brass Various Sizes - West3D 3D Printing Supplies - Bondtech\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"col-557521299\" class=\"col medium-8 small-12 large-8\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003cdiv id=\"gap-1537833883\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row row-collapse\" id=\"row-1735322586\"\u003e\n\u003cdiv id=\"col-1997280294\" class=\"col small-12 large-12\"\u003e\n\u003cdiv class=\"col-inner\"\u003e\n\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\n\u003ch3 style=\"color: red;\"\u003e30% gains or more!!?? Check the White Paper:\u003c\/h3\u003e\n\u003c\/a\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bondtech.se\/intranet\/white-paper-max-flow-rate\/\" title=\"Increasing Melt Capacity With 3 Nozzle Features\" rel=\"noopener\" target=\"_blank\"\u003e\"Increasing Melt Capacity With 3 Nozzle Features\"\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eGains apply to 1.75 \/ 2.85mm rigid materials and 2.85mm flexible filaments only.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTo achieve meaningful volumetric flow gains use at least 0.6mm diameter nozzles.\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gap-1383901364\" class=\"gap-element clearfix\" style=\"display: block; height: auto;\"\u003e\u003c\/div\u003e\n\u003ch5\u003eMain \u003cb\u003eBondtech CHT ®\u003c\/b\u003e Advantages\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHigher melt capacity by increasing the surface area of the heating walls\u003c\/li\u003e\n\u003cli\u003eAffordable price\u003c\/li\u003e\n\u003cli\u003eMachined with ultra-precision\u003c\/li\u003e\n\u003cli\u003eBrass nozzle with Nickel coated surface\u003c\/li\u003e\n\u003cli\u003eFollows nozzle standards:\n\u003cul\u003e\n\u003cli\u003eRepRap (M6×1×7.5×12.5)\u003c\/li\u003e\n\u003cli\u003eMK8 (M6×1×5×13)\u003c\/li\u003e\n\u003cli\u003eVolcano (M6×1×14.5×21)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMay be used with 1.75 or 2.85mm hotends.\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdvantages of the Bondtech CHT ® technology:\u003c\/h4\u003e\n\u003cp\u003eBondtech CHT ® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.\u003c\/p\u003e\n\u003ch4\u003eAdvantages of the Nickel Coating\u003c\/h4\u003e\n\u003cp\u003eA Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eDifferent nozzle sets for different materials\u003c\/h4\u003e\n\u003cp\u003eWe recommend you to have several sets of nozzles because:\u003cbr\u003eUsing different materials with the same nozzles causes deposit build-up inside the nozzle.\u003cbr\u003eThese deposits will cause blockages.\u003cbr\u003eWe recommend changing nozzles when changing materials.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Bondtech_600-C-CHT-MOS-175-XX.pdf?v=1742060859\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":".4mm","offer_id":44776553250925,"sku":"BON2626.4M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".5mm","offer_id":44776553283693,"sku":"BON2627.5M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":44776553316461,"sku":"BON2628.6M","price":19.0,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":44776553349229,"sku":"BON2629.8M","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1mm","offer_id":44776553381997,"sku":"BON26301MM","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/7935\/1405\/files\/bondtech-cht-high-flow-nozzles-m6-v6-nickel-coated-brass-various-sizes-west3d-3d-printing-supplies-bondtech-867549.jpg?v=1773323218"}],"url":"https:\/\/www.stayreadyto3dprint.com\/collections\/accessories-supplies.oembed?page=3","provider":"Stay Ready To 3D Print","version":"1.0","type":"link"}